HAMDEN, CT ·
OSHA Inspection: PORTO'S TIRE SERVICE INCORPORATED
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of PORTO'S TIRE SERVICE INCORPORATED in 2490 STATE STREET, HAMDEN, CT 06514 (NAICS 441320). OSHA activity number 109180646.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PORTO'S TIRE SERVICE INCORPORATED
- Site address
- 2490 STATE STREET
- City
- HAMDEN
- State
- CT
- ZIP
- 06514
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 441320
- SIC code (legacy)
- 5531
- Employees
- 7
- Ownership type
- A
Citations
17 citations on file for this inspection.
5(a)(1)
- Issued
- Apr 12, 2012
- Abate by
- May 10, 2012
- Penalty
- Initial $4,200 · Current $2,520 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to flying projectiles of hard rubber tires and metal rims while beading and seating rubber tires to the metal rims: Shop: The employer did not ensure through not only providing proper and appropriate tools and equipment, but also direct observation, instruction and training that the employees engaged in the tasks, such as (but not limited to) beading and seating rubber tires onto metal tire rims utilizing pneumatic tools were performing the tasks safely and appropriately at all times. On or about November 4, 2011, a Power King 4.80-8 nylon 6 P.R. 71M Load Range C Tubeless tire violently exploded while the tire was being beaded/seated onto a tire rim using a direct compressed air (pneumatic) line. Two (2) employees were struck by the tire and rim while performing the tasks and sustained serious bodily injuries to the hands, eyes and facials from the incident. Among other methods, one feasible and acceptable means of abatement method is to: 1. Use of appropriately designed, engineered and approved protective barrier, restraining device and/or cages. 2. Use of safe and proper portable compressed bead seaters, such as (but not limited to) the CH-5 Cheetah bead seaters and the White Blaster. 3. Follow the manufacturer's recommended operating procedures, guidelines and rules including not over- pressurizing the units, having functional gauges and valves, safety devices. 4. Train employees in safe and proper use of equipment. 5. Utilize other safe engineering practices.g
Recent events (2)
- · I (S) $2520.00
- · Z (S) $4200.00
1910.24 B
- Issued
- Apr 12, 2012
- Abate by
- May 10, 2012
- Penalty
- Initial $3,000 · Current $1,800 Reduced
Recent events (2)
- · I (S) $1800.00
- · Z (S) $3000.00
1910.133 A01
- Issued
- Apr 12, 2012
- Abate by
- Apr 25, 2012
- Penalty
- Initial $3,000 · Current $1,800 Reduced
Recent events (2)
- · I (S) $1800.00
- · Z (S) $3000.00
1910.132 D01
- Issued
- Apr 12, 2012
- Abate by
- May 10, 2012
- Penalty
- Initial $3,000 · Current $1,800 Reduced
Recent events (2)
- · I (S) $1800.00
- · Z (S) $3000.00
1910.132 F01
- Issued
- Apr 12, 2012
- Abate by
- May 10, 2012
Recent events (2)
- · I (S)
- · Z (S)
1910.157 E02
- Issued
- Apr 12, 2012
- Abate by
- Apr 25, 2012
- Penalty
- Initial $1,800 · Current $1,080 Reduced
Recent events (2)
- · I (S) $1080.00
- · Z (S) $1800.00
1910.157 E03
- Issued
- Apr 12, 2012
- Abate by
- Apr 25, 2012
Recent events (2)
- · I (S)
- · Z (S)
1910.177 C01
- Issued
- Apr 12, 2012
- Abate by
- May 10, 2012
- Penalty
- Initial $3,000 · Current $1,800 Reduced
Recent events (2)
- · I (S) $1800.00
- · Z (S) $3000.00
1910.177 D03 I
- Issued
- Apr 12, 2012
- Abate by
- May 25, 2012
- Penalty
- Initial $3,000 · Current $1,800 Reduced
Recent events (2)
- · I (S) $1800.00
- · Z (S) $3000.00
1910.177 F
- Issued
- Apr 12, 2012
- Abate by
- May 10, 2012
- Penalty
- Initial $3,000 · Current $1,800 Reduced
Recent events (2)
- · I (S) $1800.00
- · Z (S) $3000.00
1910.177 G
- Issued
- Apr 12, 2012
- Abate by
- May 10, 2012
Recent events (2)
- · I (S)
- · Z (S)
1910.219 D01
- Issued
- Apr 12, 2012
- Abate by
- May 25, 2012
- Penalty
- Initial $3,000 · Current $1,800 Reduced
Recent events (2)
- · I (S) $1800.00
- · Z (S) $3000.00
1910.219 E01 I
- Issued
- Apr 12, 2012
- Abate by
- May 25, 2012
Recent events (2)
- · I (S)
- · Z (S)
1910.303 F
- Issued
- Apr 12, 2012
- Abate by
- May 10, 2012
- Penalty
- Initial $1,800 · Current $1,080 Reduced
Recent events (2)
- · I (S) $1080.00
- · Z (S) $1800.00
1910.1200 E01
- Issued
- Apr 12, 2012
- Abate by
- May 10, 2012
- Penalty
- Initial $1,800 · Current $1,080 Reduced
Recent events (2)
- · I (S) $1080.00
- · Z (S) $1800.00
1910.1200 G08
- Issued
- Apr 12, 2012
- Abate by
- May 10, 2012
Recent events (2)
- · I (S)
- · Z (S)
1910.1200 H
- Issued
- Apr 12, 2012
- Abate by
- May 10, 2012
Recent events (2)
- · I (S)
- · Z (S)
More inspections in this industry (NAICS 441320)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 109180646.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.