STOW, MA ·
OSHA Inspection: BURROWES RESEARCH MACHINING, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of BURROWES RESEARCH MACHINING, INC. in ROUTE 62, GLEASONDALE INDUSTRIAL PARK, STOW, MA 01775 (NAICS 000000). OSHA activity number 109616516.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BURROWES RESEARCH MACHINING, INC.
- Site address
- ROUTE 62, GLEASONDALE INDUSTRIAL PARK
- City
- STOW
- State
- MA
- ZIP
- 01775
- Mailing
- P.O. BOX 863, HUDSON, MA 01749
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3599
- Employees
- 29
- Ownership type
- Private (A)
- Industry flags
- Manufacturing safety.
Citations
26 citations on file for this inspection.
1910.212 A01
- Issued
- Jun 11, 1993
- Abate by
- Jun 21, 1993
- Penalty
- Initial $1,000 · Current $600 Reduced
Recent events (2)
- · I (S) $600.00
- · Z (S) $1000.00
5(a)(1)
- Issued
- Jun 10, 1993
- Abate by
- Sep 20, 1993
- Penalty
- Initial $1,000 · Current $600 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not fuirnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to hazards of fire/explosion: (a) Metal Shop: Aluminum dust generated from the sanding of aluminium on the Ramco wide belt sander, was not properly controlled to minimize the possibility of ignition of the dust. Among other methods, one feasible and acceptable means of abatement to correct this hazard is to install an aluminum dust collection system in accordance with NFPA 65-Sandard for the processing and finishing of aluminum.
Recent events (2)
- · I (S) $600.00
- · Z (S) $1000.00
1910.106 D04 I
- Issued
- Jun 10, 1993
- Abate by
- Jun 20, 1993
- Penalty
- Initial $1,250 · Current $750 Reduced
Recent events (2)
- · I (S) $750.00
- · Z (S) $1250.00
1910.106 E06 I
- Issued
- Jun 10, 1993
- Abate by
- Jun 25, 1993
- Penalty
- Initial $1,250 · Current $750 Reduced
Recent events (2)
- · I (S) $750.00
- · Z (S) $1250.00
1910.106 E06 II
- Issued
- Jun 10, 1993
- Abate by
- Jun 20, 1993
- Penalty
- Initial $1,250 · Current $750 Reduced
Recent events (2)
- · I (S) $750.00
- · Z (S) $1250.00
1910.107 B05 I
- Issued
- Jun 10, 1993
- Abate by
- Jun 20, 1993
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- · I (S) $450.00
- · Z (S) $750.00
1910.107 E02
- Issued
- Jun 10, 1993
- Abate by
- Jun 15, 1993
- Penalty
- Initial $1,000 · Current $600 Reduced
Recent events (2)
- · I (S) $600.00
- · Z (S) $1000.00
1910.147 C04 I
- Issued
- Jun 10, 1993
- Abate by
- Aug 13, 1993
- Penalty
- Initial $1,000 · Current $600 Reduced
Recent events (2)
- · I (S) $600.00
- · Z (S) $1000.00
1910.147 C05 I
- Issued
- Jun 10, 1993
- Abate by
- Aug 13, 1993
- Penalty
- Initial $1,000 · Current $600 Reduced
Recent events (2)
- · I (S) $600.00
- · Z (S) $1000.00
1910.147 C07 I
- Issued
- Jun 10, 1993
- Abate by
- Aug 13, 1993
- Penalty
- Initial $1,000 · Current $600 Reduced
Recent events (2)
- · I (S) $600.00
- · Z (S) $1000.00
1910.157 C01
- Issued
- Jun 10, 1993
- Abate by
- Jun 15, 1993
- Penalty
- Initial $1,000 · Current $600 Reduced
Recent events (2)
- · I (S) $600.00
- · Z (S) $1000.00
1910.157 E03
- Issued
- Jun 10, 1993
- Abate by
- Jun 27, 1993
1910.212 A03 II
- Issued
- Jun 10, 1993
- Abate by
- Sep 20, 1993
- Penalty
- Initial $1,250 · Current $750 Reduced
Recent events (2)
- · I (S) $750.00
- · Z (S) $1250.00
1910.215 A02
- Issued
- Jun 10, 1993
- Abate by
- Jun 20, 1993
- Penalty
- Initial $1,000 · Current $600 Reduced
Recent events (2)
- · I (S) $600.00
- · Z (S) $1000.00
1910.215 A04
- Issued
- Jun 10, 1993
- Abate by
- Jun 20, 1993
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- · I (S) $450.00
- · Z (S) $750.00
1910.215 B01
- Issued
- Jun 10, 1993
- Abate by
- Jun 20, 1993
- Penalty
- Initial $1,000 · Current $600 Reduced
Recent events (2)
- · I (S) $600.00
- · Z (S) $1000.00
1910.215 B09
- Issued
- Jun 10, 1993
- Abate by
- Jun 20, 1993
- Penalty
- Initial $1,000 · Current $600 Reduced
Recent events (2)
- · I (S) $600.00
- · Z (S) $1000.00
1910.215 D01
- Issued
- Jun 10, 1993
- Abate by
- Jun 20, 1993
- Penalty
- Initial $1,000 · Current $600 Reduced
Recent events (2)
- · I (S) $600.00
- · Z (S) $1000.00
1910.217 C01 II
- Issued
- Jun 10, 1993
- Abate by
- Jun 14, 1993
- Penalty
- Initial $1,250 · Current $750 Reduced
Recent events (2)
- · I (S) $750.00
- · Z (S) $1250.00
1910.219 D01
- Issued
- Jun 10, 1993
- Abate by
- Jun 20, 1993
- Penalty
- Initial $1,000 · Current $600 Reduced
Recent events (2)
- · I (S) $600.00
- · Z (S) $1000.00
1910.219 E03 I
- Issued
- Jun 10, 1993
- Abate by
- Jun 20, 1993
1910.305 B03
- Issued
- Jun 10, 1993
- Abate by
- Jun 20, 1993
- Penalty
- Initial $1,000 · Current $600 Reduced
Recent events (2)
- · I (S) $600.00
- · Z (S) $1000.00
1910.305 G02 III
- Issued
- Jun 10, 1993
- Abate by
- Jun 20, 1993
1910.1200 E01
- Issued
- Jun 10, 1993
- Abate by
- Aug 13, 1993
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- · I (S) $450.00
- · Z (S) $750.00
1910.1200 H
- Issued
- Jun 10, 1993
- Abate by
- Aug 13, 1993
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- · I (S) $450.00
- · Z (S) $750.00
1904.2 B02
- Issued
- Jun 10, 1993
- Abate by
- Jun 18, 1993
More inspections at Burrowes Research Machining, INC.
View Burrowes Research Machining, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 109616516.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.