PLAINVILLE, CT —
OSHA Inspection: WASLEY PRODUCTS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of WASLEY PRODUCTS, INC. in 87 SPRING LANE, PLAINVILLE, CT 06062 (NAICS 000000). OSHA activity number 109826214.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Wasley Products, INC. — free
Get an email when a new federal OSHA severe-injury report for Wasley Products, INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- WASLEY PRODUCTS, INC.
- Site address
- 87 SPRING LANE
- City
- PLAINVILLE
- State
- CT
- ZIP
- 06062
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3061
- Employees
- 95
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
32 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 29, 1993
- Abate by
- Aug 15, 1994
- Penalty
- Initial $750 · Current $50 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to cumulative trauma disorders resulting from tear/trimming operations: IN THE ABSENCE OF ENGINEERING CONTROLS, ONE FEASIBLE AND ACCEPTABLE METHOD TO CORRECT THIS HAZARD IS: MANAGEMENT COMMITMENT: MANAGEMENT IS COMMITTED TO REDUCING OR ELIMINATING EMPLOYEE EXPOSURES AND REPETITIVE MOTION HAZARDS. WORKSITE ANALYSIS: 1. SCHEDULE A VISIT FROM THE COMPANY'S NEW INSURANCE CARRIER. INQUIRE ABOUT SPECIFIC IDEAS FOR WORKSTATION DESIGN AND SCHEDULING OF REST BREAKS. REQUEST THAT THEY PROVIDE UPDATES TO THE COMPANY REGARDING ANY NEW DEVELOPMENTS THAT MAY REDUCE EMPLOYEE EXPOSURES. 2. REVIEW ANY EXISTING SURVEYS THAT WERE PERFORMED TO DETERMINE IF PRIOR RECOMMENDATIONS CAN BE INCLUDED IN ANY WORKSTATION OR POLICY CHANGES. HAZARD PREVENTION AND CONTROL: 1. CONTINUE TO ACTIVELY EXPLORE NEW TECHNOLOGIES SUCH AS CRYOGENICS, LASER TECHNOLOGY AND MOLD DESIGN. 2. REDESIGN WORKSTATIONS. POSSIBLE DESIGN OPTIONS COULD INCLUDE ADJUSTABLE HEIGHT AND TILT WORK SURFACES, CUT-OUTS IN THE WORK SURFACE, ERGONOMICALLY DESIGNED CHAIRS, AND FOOT RESTS. 3. REPLACE AND/OR REVISE THE PIECE-RATE SYSTEM AND INCORPORATE ADEQUATE REST BREAKS INTO THE WORKDAY. (OSHA REGION 1 ERGONOMIST HAS RECENT INFORMATION TO AID IN CALCULATING FREQUENCY AND DURATION OF REST BREAKS). 4. COMPLETE THE TOOL REDESIGN PROJECT. TRAIING AND EDUCATION: 1. PROVIDE TRAINING AND EDUCAITON TO EMPLOYEES AS ERGONOMIC CHANGES ARE MADE TO WORKSTATIONS. DISCUSTT WITH THE COMPANY'S INSURANCE CARRIER THE POSSIBILITY OF INSURANCE REPRESENTATIVES PRESENTING ERGONOMIC EDUCATION TO EMPLOYEES. 2. ESTABLISH AN ERGONOMICS COMMITTEE. COMMITTEE MEMBERS COULD ALSO TEST NEW TOOL AND/OR WORKSTATION DESIGNS AND AID WITH THE IMPLEMENTATION OF NEW IDEAS TO REDUCE EXPOSURES. MEDICAL MANAGEMENT: CONTINUE TO PROVIDE CONSERVATIVE TREATMENT TO EMPLOYEES WHO EXPERIENCE SYMPTOMS. INCLUDE MEMBERS OF THE ERGONOMICS COMMITTEE WHEN DISCUSSING LIGHT DUTY
Recent events (2)
- — I (S) $50.00
- — Z (S) $750.00
1910.147 C05 I
- Issued
- Dec 29, 1993
- Abate by
- Apr 30, 1994
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1910.147 C05 II
- Issued
- Dec 29, 1993
- Abate by
- Apr 30, 1994
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C07 I
- Issued
- Dec 29, 1993
- Abate by
- Apr 30, 1994
Recent events (2)
- — I (S)
- — Z (S)
1910.332 B01
- Issued
- Dec 29, 1993
- Abate by
- Apr 30, 1994
Recent events (2)
- — I (S)
- — Z (S)
1910.147 D01
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
- Penalty
- Initial $1,250
Recent events (2)
- — I (O)
- — Z (S) $1250.00
1910.147 D02
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
- Penalty
- Current $300
Recent events (2)
- — I (S) $300.00
- — Z (S)
1910.151 C
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1000.00
1910.216 A04
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1000.00
1910.216 F02
- Issued
- Dec 29, 1993
- Abate by
- Jan 4, 1994
1910.217 C02 IA
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
- Penalty
- Initial $500 · Current $500
1910.217 C03 IV
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
1910.217 C03 VIII
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
1910.219 D01
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
- Penalty
- Initial $375 · Current $375
1910.219 E03 I
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
1910.219 F03
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
1910.242 B
- Issued
- Dec 29, 1993
- Abate by
- Mar 31, 1994
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1000.00
1910.303 G02 I
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
- Penalty
- Initial $375 · Current $375
1910.304 F05 V
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
- Penalty
- Initial $375 · Current $375
1910.305 B01
- Issued
- Dec 29, 1993
- Abate by
- Jan 4, 1994
1910.305 B02
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
1910.305 E01
- Issued
- Dec 29, 1993
- Abate by
- Jan 4, 1994
1910.305 G01 III
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
1910.305 G02 III
- Issued
- Dec 29, 1993
- Abate by
- Jan 4, 1994
1910.1030 C01 I
- Issued
- Dec 29, 1993
- Abate by
- May 30, 1994
- Penalty
- Initial $375 · Current $375
1910.1030 G02 I
- Issued
- Dec 29, 1993
- Abate by
- May 30, 1994
1910.212 A01
- Issued
- Dec 29, 1993
- Abate by
- Jan 4, 1994
1910.215 A04
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
1910.215 B09
- Issued
- Dec 29, 1993
- Abate by
- Jan 4, 1994
1910.219 C02 I
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
1910.303 F
- Issued
- Dec 29, 1993
- Abate by
- Feb 16, 1994
1910.303 G01 II
- Issued
- Dec 29, 1993
- Abate by
- Jan 5, 1994
More inspections at Wasley Products, INC.
Aug 10, 2006
PLAINVILLE, CT
Dec 9, 2002
PLAINVILLE, CT
Nov 19, 2002
PLAINVILLE, CT
Jun 18, 1982
Plainville, CT
Jan 9, 1980
Plainville, CT
View Wasley Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
Jan 5, 2012
Bruce D. Bowman · SCHENECTADY, NY
Jan 25, 2005
KGC, INC. · BILLINGS, MT
Dec 31, 2002
Rockaway Borough DPW · ROCKAWAY, NJ
Dec 31, 2002
Harry Brickey DBA a. Brickey Ceiling Company · FOREST CITY, NC
Dec 31, 2002
Sudden Bond Industries · EDGERTON, KS
More inspections in CT
Jul 16, 2026
Bianco & Sons, LLC · EAST HAVEN, CT
Jul 16, 2026
Moms Enfield · ENFIELD, CT
Jul 16, 2026
Harbor Freight · DAYVILLE, CT
Jul 14, 2026
Jananii, LLC · NEW BRITAIN, CT
Jul 14, 2026
Truss Manufacturing INC · NEWINGTON, CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 109826214.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.