PONTE VEDRA BEACH, FL ·
OSHA Inspection: PONTE VEDRA INN & CLUB, INC.
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of PONTE VEDRA INN & CLUB, INC. in 200 PONTE VEDRA BLVD., PONTE VEDRA BEACH, FL 32082 (NAICS 000000). OSHA activity number 110096260.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PONTE VEDRA INN & CLUB, INC.
- Site address
- 200 PONTE VEDRA BLVD.
- City
- PONTE VEDRA BEACH
- State
- FL
- ZIP
- 32082
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 7997
- Employees
- 513
- Ownership type
- A
Citations
8 citations on file for this inspection.
5(a)(1)
- Issued
- Mar 2, 1995
- Abate by
- Mar 10, 1995
- Penalty
- Initial $6,300 · Current $5,650 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The %% employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that: a.At the Ocean Golf Course and grounds, employees were exposed to the hazard of personal injury caused by failure to receive proper instruction before operating a Toro Sand Pro machine according to the manufacturers instructions. On October 17, 1994, an employee was fatally injured when the steering chain broke on a Toro Model #08880 Sand Pro #14 Sand Raker machine. The employee was not adequately trained in the maintenance and safety instructions required by the manufacturer in that, employees did not read and understand the contents of the operator's manual such as ensuring that the traction interlock switch is adjusted correctly, checking the interlock system at the beginning of each day, wearing long pants, making sure the neutral return bracket is adjusted and making sure the steering chain and sprocket is inspected and maintained daily. Among other methods, one feasible and acceptable abatement method is to: 1.Adequately train all employees according to the manufacturers operator's manual before and employee is allowed to operate any machine. 2.Clean machine daily, especially make sure the steering chain is free of sand. 3.Lubricate the steering chain when the chain is stiff or rusty; use drytype lubricant and lube lightly; inspect the chain daily. 4.Check operation of interlock system daily before use.
Recent events (2)
- · I (S) $5650.00
- · Z (S) $6300.00
1910.212 B
- Issued
- Mar 2, 1995
- Abate by
- Mar 10, 1995
- Penalty
- Initial $1,350 · Current $1,225 Reduced
Recent events (2)
- · I (S) $1225.00
- · Z (S) $1350.00
1910.215 A04
- Issued
- Mar 2, 1995
- Abate by
- Mar 10, 1995
- Penalty
- Initial $1,350 · Current $1,225 Reduced
Recent events (2)
- · I (S) $1225.00
- · Z (S) $1350.00
1910.215 B09
- Issued
- Mar 2, 1995
- Abate by
- Mar 10, 1995
Recent events (2)
- · I (S)
- · Z (S)
1910.303 G02 I
- Issued
- Mar 2, 1995
- Abate by
- Mar 10, 1995
- Penalty
- Initial $2,250
Recent events (2)
- · I (S)
- · Z (S) $2250.00
1910.304 A02
- Issued
- Mar 2, 1995
- Abate by
- Mar 10, 1995
1910.1200 E01
- Issued
- Mar 2, 1995
- Abate by
- Mar 30, 1995
- Penalty
- Initial $1,800
Recent events (2)
- · I (S)
- · Z (S) $1800.00
1910.1200 H02 II
- Issued
- Mar 2, 1995
- Abate by
- Mar 30, 1995
More inspections in this industry (NAICS 000000)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 110096260.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.