WYNNE, AR —
OSHA Inspection: BIG VALLEY TRAILERS, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of BIG VALLEY TRAILERS, INC. in 1675 S. FALLS BLVD., WYNNE, AR 72396 (NAICS 000000). OSHA activity number 110354057.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BIG VALLEY TRAILERS, INC.
- Site address
- 1675 S. FALLS BLVD.
- City
- WYNNE
- State
- AR
- ZIP
- 72396
- Mailing
- P. O. BOX 246, WYNNE, AR 72396
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3715
- Employees
- 15
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
11 citations on file for this inspection.
5(a)(1)
- Issued
- May 6, 1994
- Abate by
- Jun 2, 1994
- Penalty
- Initial $1,400 · Current $700 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a.In the finishing area, employees cleaning and applying silicon were working on the top of the trailers that varied from 95 to 98 inches from the floor. Fall protection was not provided exposing employees to the hazard of falls from elevation. b.In the washing area, employees were standing on the tops of trailers 87 inches tall using a high pressure hose to wash the tops of the trailers with degreaser. Fall protection was not provided exposing employees to the hazard of falls from elevation. Feasible abatement methods could include but are not limited to: 1.Construct a portable scaffold system with adjustments to meet the height and width of the various trailers and provides perimeter guarding around the trailer when employees are required to work on top of the trailer. 2.Install a suspended static line or life line in a arrangement which can be used by employees during the cleaning, washing and silicon operations where the employees work on top of the trailers and implement a program requiring the use of safety belts and lanyards attached to the static or life lines. Disclaimers: 1.The employer is not limited to the abatement methods suggested by OSHA. 2.The methods explained are general and may not be effective in all cases. 3.The employer is responsible for selecting and carrying out an appropriate abatement method. IN THE ALTERNATIVE 29 CFR 1910.23(c)(1): Open sided floor(s) or platform(s) 4 feet or more above the adjacent floor or ground level were not guarded by standard railings (or the equivalent as specified in 29 CFR 1910.23(e)(3)(i) through (vi), on all open sides: a.In the Finishing area, employees cleaning and applying silicon were working on the top of the trailers that varied from 95 to 98 inches from the floor. Guard rails were not provided exposing employees to the hazard of falls from elevation. b.In the Washing area, employees were standing on the tops of trailers 87 inches tall using a high pressure hose to wash the tops of the trailers with degreaser. Guardrails were not provided exposing employees to the hazard of falls from elevation.
Recent events (2)
- — I (S) $700.00
- — Z (S) $1400.00
1910.95 C01
- Issued
- May 6, 1994
- Abate by
- May 18, 1994
- Penalty
- Initial $2,000 · Current $1,000 Reduced
8110
Recent events (2)
- — I (S) $1000.00
- — Z (S) $2000.00
1910.242 B
- Issued
- May 6, 1994
- Abate by
- May 18, 1994
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1000.00
1910.305 B01
- Issued
- May 6, 1994
- Abate by
- May 18, 1994
- Penalty
- Initial $800 · Current $400 Reduced
Recent events (2)
- — I (S) $400.00
- — Z (S) $800.00
1910.305 G02 II
- Issued
- May 6, 1994
- Abate by
- May 18, 1994
- Penalty
- Initial $2,000 · Current $1,000 Reduced
Recent events (2)
- — I (R) $1000.00
- — Z (R) $2000.00
1910.1200 H
- Issued
- May 6, 1994
- Abate by
- May 18, 1994
- Penalty
- Initial $1,200 · Current $600 Reduced
Recent events (2)
- — I (R) $600.00
- — Z (R) $1200.00
1904.5 B
- Issued
- May 6, 1994
- Abate by
- May 25, 1994
- Penalty
- Initial $1,200 · Current $600 Reduced
Recent events (2)
- — I (O) $600.00
- — Z (O) $1200.00
1910.37 Q01
- Issued
- May 6, 1994
- Abate by
- May 25, 1994
1910.37 Q02
- Issued
- May 6, 1994
- Abate by
- May 25, 1994
1910.157 C04
- Issued
- May 6, 1994
- Abate by
- May 25, 1994
1910.157 E03
- Issued
- May 6, 1994
- Abate by
- May 25, 1994
More inspections at BIG Valley Trailers, INC.
View BIG Valley Trailers, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in AR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 110354057.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.