Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,198,892Inspections Most recent open 2026-09-03 Last loaded 2026-09-07

OSHA Inspection: SECO/WARWICK CORPORATION

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of SECO/WARWICK CORPORATION in 14555 OLD CORPUS CHRISTI HIGHWAY, SAN ANTONIO, TX 78112 (NAICS 000000). OSHA activity number 110383676.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Seco/Warwick Corporation for free Get an email when a new federal OSHA severe-injury report for Seco/Warwick Corporation is published. One employer, no account, unsubscribe in one click.
Site address
14555 OLD CORPUS CHRISTI HIGHWAY
City
SAN ANTONIO
State
TX
ZIP
78112
Mailing
180 MERCER ST., MEADVILLE, PA 16335
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (N)
Opened
Closing conference
Case closed
Data loaded
NAICS code
000000
SIC code (legacy)
1629
Employees
12
Ownership type
Private (A)

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 1 exposed
Issued
Sep 5, 1991
Abate by
Sep 10, 1991
Penalty
Initial $3,500 · Current $3,000 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not furnish employment and a place of employment which
were free from recognized hazards that were causing or likely to cause
death or serious physical harm to employees in that employees were
exposed to:
(a)  An improperly designed free-standing steel stack at the
Golden Aluminum Company plant site at 14555 Old Corpus Christi Road,
San Antonio, Texas, on or about March 7, 1991.  The ASMF/ANSI Steel
Stack Standard, STS-1-1986, and recognized industry practice was not
followed.
Among other methods, one feasible and acceptable method to
correct this hazazard is to follow the design criteria specified in
ASMF/ANSI Steel Stack Standard STS-1-1986.
Recent events (2)
  • · F (S) $3000.00
  • · Z (S) $3500.00

5(a)(1)

Serious Gravity 10 1 instance 1 exposed
Issued
Sep 5, 1991
Abate by
Sep 10, 1991
Penalty
Initial $3,500 · Current $2,000 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
%%
employer did not furnish employment and a place of employment which
were free from recognized hazards that were causing or likely to cause
death or serious physical harm to employees in that employees were
exposed to:
(a)  Improper field erection of the free-standing steel stack
on or about March 7, 1990, at the Golden Aluminum Company plant site
at 14555 Old Corpus Christi Road, San Antonio, Texas.  The employer
failed to provide detailed field assembly instructions for the stack
erection.
Among other methods, one feasible and acceptable abatement method
to correct this  hazard is to provide adequate instructions to ensure
the proper field erection of steel stacks.
Recent events (2)
  • · F (S) $2000.00
  • · Z (S) $3500.00

5(a)(1)

Serious Gravity 10 1 instance 1 exposed
Issued
Sep 5, 1991
Abate by
Sep 10, 1991
Penalty
Initial $3,500 · Current $2,000 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not furnish employment and a place of employment which
were free from recognized hazards that were causing or likely to cause
death or serious physical harm to employees in that employees were
exposed to:
(a)  The collapse of a free-standing steel stack at the Golden
Aluminum Company plant site at 14555 Old Corpus Christi Road, San
Antonio, Texas, on or about March 7, 1991.  The employer failed to
ensure the integrity of the field welds by adequate inspections and
non-destructive testing of the welds by recognized methods, such as
ultrasonic, radiographic testing, etc.
Among other methods, one feasible and acceptable abatement method
to correct this hazard is to conduct inspections and testing to ensure
the integrity of the field welds.
Recent events (2)
  • · F (S) $2000.00
  • · Z (S) $3500.00

1926.59 E01 I

Other-than-serious Gravity 01 1 instance 12 exposed
Issued
Sep 5, 1991
Abate by
Sep 11, 1991
Recent events (2)
  • · F (O)
  • · Z (O)

View Seco/Warwick Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 110383676.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.