ERIE, PA —
OSHA Inspection: THOMAS ERIE
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of THOMAS ERIE in 1501 CHESTNUT STREET, ERIE, PA 16502 (NAICS 000000). OSHA activity number 113339188.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THOMAS ERIE
- Site address
- 1501 CHESTNUT STREET
- City
- ERIE
- State
- PA
- ZIP
- 16502
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3499
- Employees
- 60
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
39 citations on file for this inspection.
5(a)(1)
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
- Penalty
- Initial $500 · Current $500
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) Press Department - The Yale Hoists in the Press Department were not kept in good repair in that the following deficiencies were noted: 1.) Pendant control boxes had openings which could result in electrical shock; 2.) Pendant control boxes were not clearly marked for identification of functions; 3.) Limit switches were not being checked daily; 4.) Running ropes were not inspected frequently; 5.) Hooks were not inspected frequently. Among other methods, one feasible and acceptable abatement method to correct this hazard is to develop a preventive maintenance program in accordance with the hoist manufacturer's specifications and also ANSI B30.16.
5(a)(1)
- Issued
- Jan 14, 1993
- Abate by
- Feb 6, 1993
- Penalty
- Initial $675 · Current $675
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) Production and Gasket Line - Employees loading "cups" into the feed hoppers by dumping barrels from elevated platforms. The platform is on the forks of powered industrial truck (fork lifts) approximately 8 feet above the concrete floor. The platform was not secured to the powered industrial trucks lifting carriage and/or forks and did not have standard guard rails on all open sides exposing employee(s) to a fall hazard. Among other methods, one feasible and acceptable abatement method to correct this hazard is the use of a platform meeting the following requirements: 1. Platform must be secured to the lifting carriage and/or forks. 2. Platform must have a slip resistant surface. 3. Platform must be equipped with a standard guard rail system as follows: a. System to consist of toprail, midrail, and toeboard. b. Toprail positioned with a vertical height of between 39 and 45 inches above the surface of the platform. Rope, chain, etc. used in place of solid railing not be able to be deflected more than 3 inches outward when a 200 pound force is applied and downward deflection to assure vertical height does not go below 39 inches. c. Midrail be positioned about 1/2 way between platform surface and uppermost surface of top guard rail. d. Access opening through the guard rail system be protected by a device providing equivalent protection of the guard rail system. 4. Operator to be in the control position of the powered truck when personnel elevated. 5. Overhead protection is mandatory for the powered truck and, if required by operating conditions, the platform. 6. When the moving parts of the truck represent a hazard, means must be provided to protect personnel in the normal working position. 7. Workers are to be instructed to keep their feet on the surface of the platform so as not to negate the protective guard rail system.
1910.22 A01
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
- Penalty
- Initial $100 · Current $100
1910.23 C01
- Issued
- Jan 14, 1993
- Abate by
- Mar 16, 1993
- Penalty
- Initial $1,025 · Current $1,025
1910.24 B
- Issued
- Jan 14, 1993
- Abate by
- Apr 1, 1993
- Penalty
- Initial $850 · Current $850
1910.25 D02 XII
- Issued
- Jan 14, 1993
- Abate by
- Feb 6, 1993
1910.25 D01 I
- Issued
- Jan 14, 1993
- Abate by
- Feb 6, 1993
- Penalty
- Initial $325 · Current $325
1910.25 D01 X
- Issued
- Jan 14, 1993
- Abate by
- Feb 6, 1993
1910.26 C02 IV
- Issued
- Jan 14, 1993
- Abate by
- Feb 6, 1993
- Penalty
- Initial $500 · Current $500
1910.26 C02 VIA
- Issued
- Jan 14, 1993
- Abate by
- Feb 6, 1993
1910.26 C02 VII
- Issued
- Jan 14, 1993
- Abate by
- Feb 6, 1993
1910.28 A01
- Issued
- Jan 14, 1993
- Abate by
- Jan 20, 1993
- Penalty
- Initial $325 · Current $325
1910.36 D01
- Issued
- Jan 14, 1993
- Abate by
- Feb 6, 1993
- Penalty
- Initial $325 · Current $325
1910.37 F01
- Issued
- Jan 14, 1993
- Abate by
- Feb 6, 1993
1910.95 I02 I
- Issued
- Jan 14, 1993
- Abate by
- Feb 6, 1993
- Penalty
- Initial $500 · Current $500
1910.95 K03 II
- Issued
- Jan 14, 1993
- Abate by
- Feb 6, 1993
1910.120 G01
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
1910.132 A
- Issued
- Jan 14, 1993
- Abate by
- Feb 6, 1993
- Penalty
- Initial $100 · Current $100
1910.134 A02
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
1910.147 C01
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
- Penalty
- Initial $1,025 · Current $1,025
1910.333 B02 I
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
1910.176 B
- Issued
- Jan 14, 1993
- Abate by
- Jan 20, 1993
- Penalty
- Initial $325 · Current $325
1910.178 L
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
- Penalty
- Initial $325 · Current $325
1910.212 A03 II
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
- Penalty
- Initial $325 · Current $325
1910.332 B01
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
- Penalty
- Initial $325 · Current $325
1910.332 B03
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
1910.1030 C01
- Issued
- Jan 14, 1993
- Abate by
- Apr 1, 1993
- Penalty
- Initial $325 · Current $325
1910.1200 H02 I
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
- Penalty
- Initial $325 · Current $325
1910.1200 H02 II
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
1910.1200 H02 III
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
1910.1200 H02 IV
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
1910.22 A01
- Issued
- Jan 14, 1993
- Abate by
- Jan 20, 1993
1910.95 E
- Issued
- Jan 14, 1993
- Abate by
- Feb 6, 1993
1910.95 L01
- Issued
- Jan 14, 1993
- Abate by
- Feb 6, 1993
1910.157 E02
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
1910.157 E03
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
1910.157 G02
- Issued
- Jan 14, 1993
- Abate by
- Feb 16, 1993
1910.25 D01 X
- Issued
- Jan 12, 1993
- Abate by
- Feb 4, 1993
1910.26 C03 I
- Issued
- Jan 12, 1993
- Abate by
- Feb 4, 1993
More inspections in this industry (NAICS 000000)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 113339188.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.