YORKTOWN HGTS, NY —
OSHA Inspection: CURRY MOTORS INC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CURRY MOTORS INC in 3805 CROMPOND RD, YORKTOWN HGTS, NY 10598 (NAICS 000000). OSHA activity number 114110158.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CURRY MOTORS INC
- Site address
- 3805 CROMPOND RD
- City
- YORKTOWN HGTS
- State
- NY
- ZIP
- 10598
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 5511
- Employees
- 40
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
8 citations on file for this inspection.
5(a)(1)
- Issued
- May 31, 1994
- Abate by
- Jun 8, 1994
- Penalty
- Initial $2,500 · Current $1,650 Reduced
General-duty citation text
Section 5(a)(1): of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were expose to: Hazards of being crushed, struck or pinned. Service Dept. 12 Globe auto lifts. On or About 05/19/94 a) Employees were exposed to the hazards of being struck, crushed or pinned from the Globe auto lifts, while working under vehicles on the lift, which were being operated without a safety lock, to lock the Globe lift in position when elevated to the 5 foot or 6 foot height. AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE ABATEMENT METHOD TO CORRECT THIS HAZARD IS: (1) Conduct the recommended inspections of the lift by the manufacturer to ensure that the mechanical locking device and all other operating components are in safe operating condition. (2)Follow the requirements of ANSI B153-1-1990 - 4.1.11, Automatic Lift Institute Publication ALISM 89-1 and NIOSH Publication No. 77-22. locking device shall hold the lift in the extended position. (3) Conduct required maintenance procedure described by the manufacturer (Globe). Inspect lift daily, never operate if it malfunctions or if it has broken or damaged parts. (4) Instruct and train employees in the proper use of the manufacturer's (Globe) procedures for safe operations of the lift, including the mechanical locking device.
Recent events (2)
- — I (S) $1650.00
- — Z (S) $2500.00
1910.107 E09
- Issued
- May 31, 1994
- Abate by
- Jun 8, 1994
- Penalty
- Initial $2,500 · Current $1,650 Reduced
Recent events (2)
- — I (S) $1650.00
- — Z (S) $2500.00
1910.157 C01
- Issued
- May 31, 1994
- Abate by
- Jun 8, 1994
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.303 B01
- Issued
- May 31, 1994
- Abate by
- Jun 8, 1994
- Penalty
- Initial $1,000 · Current $650 Reduced
Recent events (2)
- — I (S) $650.00
- — Z (S) $1000.00
1910.304 F04
- Issued
- May 31, 1994
- Abate by
- Jun 8, 1994
- Penalty
- Initial $1,000 · Current $650 Reduced
Recent events (2)
- — I (S) $650.00
- — Z (S) $1000.00
1910.1200 E01
- Issued
- May 31, 1994
- Abate by
- Jul 3, 1994
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.1200 H
- Issued
- May 31, 1994
- Abate by
- Jul 3, 1994
1904.2 A
- Issued
- May 31, 1994
- Abate by
- Jun 2, 1994
- Penalty
- Initial $1,000
Recent events (2)
- — I (O)
- — Z (O) $1000.00
More inspections in this industry (NAICS 000000)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 114110158.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.