GREENCASTLE, PA —
OSHA Inspection: FAB TECH INDUSTRIES, INCORPORATED
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of FAB TECH INDUSTRIES, INCORPORATED in 80 COMMERCE AVENUE, GREENCASTLE, PA 17225 (NAICS 000000). OSHA activity number 116153149.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FAB TECH INDUSTRIES, INCORPORATED
- Site address
- 80 COMMERCE AVENUE
- City
- GREENCASTLE
- State
- PA
- ZIP
- 17225
- Mailing
- P. O. BOX 38, GREENCASTLE, PA 17225
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3443
- Employees
- 40
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
14 citations on file for this inspection.
5(a)(1)
- Issued
- Nov 18, 1996
- Abate by
- Apr 1, 1997
- Penalty
- Initial $1,225 · Current $625 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the homemade dies breaking and shrapnel from the dies striking employees: (a)Building Number One, One Hundred Seventy Five (175) Ton Wysong Press Brake - Employer was using homemade dies in the press brake with no indication of the capacity of the dies. The dies were not designed by a Professional Engineer and no drawings or calculations were available for review. Among other methods, one feasible and acceptable abatement method to correct this hazard is to have the homemade dies certified and/or designed for the tonnage, stroke and shut height requirements.
Recent events (3)
- — P (S) $625.00
- — I (S) $625.00
- — Z (S) $1225.00
1910.132 D01
- Issued
- Nov 18, 1996
- Abate by
- Dec 21, 1996
- Penalty
- Initial $1,225 · Current $625 Reduced
Recent events (2)
- — I (S) $625.00
- — Z (S) $1225.00
1910.132 F04
- Issued
- Nov 18, 1996
- Abate by
- Nov 28, 1996
1910.133 A02
- Issued
- Nov 18, 1996
- Abate by
- Nov 28, 1996
1910.178 M05 I
- Issued
- Nov 18, 1996
- Abate by
- Nov 28, 1996
- Penalty
- Initial $875 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $875.00
1910.178 P01
- Issued
- Nov 18, 1996
- Abate by
- Dec 21, 1996
- Penalty
- Initial $1,225 · Current $625 Reduced
Recent events (2)
- — I (S) $625.00
- — Z (S) $1225.00
1910.184 I09 III
- Issued
- Nov 18, 1996
- Abate by
- Dec 1, 1996
- Penalty
- Initial $1,225 · Current $625 Reduced
Recent events (2)
- — I (S) $625.00
- — Z (S) $1225.00
1910.212 A01
- Issued
- Nov 18, 1996
- Abate by
- Dec 21, 1996
- Penalty
- Initial $700 · Current $350 Reduced
Recent events (2)
- — I (S) $350.00
- — Z (S) $700.00
1910.212 A03 II
- Issued
- Nov 18, 1996
- Abate by
- Dec 21, 1996
- Penalty
- Initial $1,225 · Current $625 Reduced
Recent events (2)
- — I (S) $625.00
- — Z (S) $1225.00
1910.252 B02 IA
- Issued
- Nov 18, 1996
- Abate by
- Dec 1, 1996
- Penalty
- Initial $1,225 · Current $625 Reduced
Recent events (2)
- — I (S) $625.00
- — Z (S) $1225.00
1910.252 B02 III
- Issued
- Nov 18, 1996
- Abate by
- Dec 21, 1996
1910.1200 E01
- Issued
- Nov 18, 1996
- Abate by
- Apr 1, 1997
- Penalty
- Initial $875 · Current $450 Reduced
Recent events (3)
- — P (S) $450.00
- — I (S) $450.00
- — Z (S) $875.00
1910.1200 H
- Issued
- Nov 18, 1996
- Abate by
- Apr 1, 1997
Recent events (3)
- — P (S)
- — I (S)
- — Z (S)
1910.147 C01
- Issued
- Nov 18, 1996
- Abate by
- Feb 1, 1997
- Penalty
- Initial $350 · Current $100 Reduced
Recent events (2)
- — I (O) $100.00
- — Z (O) $350.00
More inspections at FAB Tech Industries, Incorporated
View FAB Tech Industries, Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 116153149.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.