CARLISLE, PA —
OSHA Inspection: CARLISLE TIRE & WHEEL COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CARLISLE TIRE & WHEEL COMPANY in 621 NORTH COLLEGE STREET, PLANT #1, CARLISLE, PA 17013 (NAICS 000000). OSHA activity number 116194606.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CARLISLE TIRE & WHEEL COMPANY
- Site address
- 621 NORTH COLLEGE STREET, PLANT #1
- City
- CARLISLE
- State
- PA
- ZIP
- 17013
- Mailing
- P.O. BOX 99, CARLISLE, PA 17013
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3011
- Employees
- 600
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
7 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 27, 1998
- Abate by
- Sep 28, 1998
- Penalty
- Initial $1,500 · Current $375 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: crushing hazard by the collapse of the steel I-beams that support the tail pulley and the walkway. (a)Stock Prep Area, Number One (1) Tread Line - The support I-beams for the walkway and tail pulley on the number one (1) tread cooling belt at the north end were showing severe deterioration due to rust. The beams were reduced in size from three eights (3/8) inch thickness to one quarter (1/4) and one thirty second (1/32) of a inch. The beams at certain areas crumbled under a finger touch. AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE ABATEMENT METHOD IS TO HAVE THE STRUCTURE EVALUATED BY A REGISTERED ENGINEER AND APPROPRIATE CORRECTIONS MADE TO STRENGTHEN THE STRUCTURE.
Recent events (2)
- — I (S) $375.00
- — Z (S) $1500.00
5(a)(1)
- Issued
- Jul 27, 1998
- Abate by
- Aug 29, 1998
- Penalty
- Initial $1,500 · Current $600 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to crushing from a falling load from the failure of the spreader bar being over loaded: (a)Stock Prep Area, Number FOUR (4) Bias Cutter - The employees were using a sixty six (66) inch long spreader bar that was attached to an underhung crane equipped with a two (2) ton electric Budget hoist. The spreader bar was not marked for the rated capacity and employees were lifting 2240 pounds with the spreader bar. AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE ABATEMENT METHOD TO CORRECT THIS HAZARD IS TO RATE THE CAPACITY OF THE SPREADER BAR AND MARK IT ON THE SIDE.
Recent events (2)
- — I (S) $600.00
- — Z (S) $1500.00
1910.23 C01
- Issued
- Jul 27, 1998
- Abate by
- Aug 14, 1998
- Penalty
- Initial $1,125 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $1125.00
1910.147 C02 II
- Issued
- Jul 27, 1998
- Abate by
- Aug 29, 1998
- Penalty
- Initial $1,875 · Current $750 Reduced
Recent events (2)
- — I (S) $750.00
- — Z (S) $1875.00
1910.212 A01
- Issued
- Jul 27, 1998
- Abate by
- Aug 29, 1998
- Penalty
- Initial $2,625 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $2625.00
1910.212 A03 II
- Issued
- Jul 27, 1998
- Abate by
- Feb 28, 1999
- Penalty
- Initial $2,625 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $2625.00
1910.303 G01 III
- Issued
- Jul 27, 1998
- Abate by
- Aug 6, 1998
More inspections at Carlisle Tire & Wheel Company
View Carlisle Tire & Wheel Company's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 116194606.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.