GARLAND, TX —
OSHA Inspection: PRIOR REMANUFACTURING
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PRIOR REMANUFACTURING in 315 INTERNATIONAL ROAD, GARLAND, TX 75043 (NAICS 000000). OSHA activity number 116308495.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PRIOR REMANUFACTURING
- Site address
- 315 INTERNATIONAL ROAD
- City
- GARLAND
- State
- TX
- ZIP
- 75043
- Mailing
- P. O. BOX 462167, GARLAND, TX 75046
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3714
- Employees
- 119
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
17 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 8, 1995
- Abate by
- Jul 29, 1996
- Penalty
- Initial $4,000 · Current $3,000 Reduced
General-duty citation text
SECTION 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment to employees which was free from recognized hazards that were causing or likely to cause serious physical harm to employees when compressed air is transmitted through polyvinyl chloride (PVC) pipe, exposing employees to the hazard of being struck by flying fragments: a.Polyvinyl chloride PVC pipe was installed throughout the plant and used to transmit compressed air for plant use. Feasible abatement methods to correct this condition may include but are not limited to: 1.Enclosing the polyvinyl chloride (PVC) line in a conduit pipe of sufficient strength to provide protection from external damage and prevent employees from being struck by flying fragments. 2.Install a pipe system designed for compressed air as recommended by the American National Standards Institute, American Society of Mechanical Engineers (ANSI/ASME B.31.8.1986, Sections 842.32, 842.43 and 849.52(b) Gas Transmission and Distribution Piping System.
Recent events (2)
- — F (S) $3000.00
- — Z (S) $4000.00
1910.36 B08
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
- Penalty
- Initial $1,600 · Current $100 Reduced
Recent events (2)
- — F (O) $100.00
- — Z (S) $1600.00
1910.212 A01
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
- Penalty
- Initial $1,200 · Current $1,000 Reduced
Recent events (2)
- — F (S) $1000.00
- — Z (S) $1200.00
1910.212 A03 II
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
- Penalty
- Initial $4,000 · Current $3,000 Reduced
Recent events (2)
- — F (S) $3000.00
- — Z (S) $4000.00
1910.215 A02
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
- Penalty
- Initial $1,200 · Current $1,000 Reduced
Recent events (2)
- — F (S) $1000.00
- — Z (S) $1200.00
1910.215 A04
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
- Penalty
- Initial $1,200
Recent events (2)
- — F (S)
- — Z (S) $1200.00
1910.215 B09
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
Recent events (2)
- — F (S)
- — Z (S)
1910.217 B03 I
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
- Penalty
- Initial $1,200 · Current $600 Reduced
Recent events (2)
- — F (S) $600.00
- — Z (S) $1200.00
1910.217 B05 I
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
Recent events (2)
- — F (S)
- — Z (S)
1910.217 C01 I
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
Recent events (2)
- — F (S)
- — Z (S)
1910.219 D01
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
- Penalty
- Initial $2,000 · Current $1,000 Reduced
Recent events (2)
- — F (S) $1000.00
- — Z (S) $2000.00
1910.219 E03 I
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
Recent events (2)
- — F (S)
- — Z (S)
1910.219 I02
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
- Penalty
- Initial $1,200
Recent events (2)
- — F (S)
- — Z (S) $1200.00
1910.242 B
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
- Penalty
- Initial $1,200
Recent events (2)
- — F (O)
- — Z (S) $1200.00
1910.304 F05 V
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
- Penalty
- Initial $2,000 · Current $1,000 Reduced
Recent events (2)
- — F (S) $1000.00
- — Z (S) $2000.00
1910.147 C04 I
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
Recent events (2)
- — F (O)
- — Z (O)
1910.303 F
- Issued
- Dec 8, 1995
- Abate by
- Jan 29, 1996
Recent events (2)
- — F (O)
- — Z (O)
More inspections at Prior Remanufacturing
View Prior Remanufacturing's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 116308495.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.