LITTLE ROCK, AR —
OSHA Inspection: C & N MASONRY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of C & N MASONRY in 701 NAPA VALLEY DRIVE, LITTLE ROCK, AR 72211 (NAICS 000000). OSHA activity number 117972547.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C & N MASONRY
- Site address
- 701 NAPA VALLEY DRIVE
- City
- LITTLE ROCK
- State
- AR
- ZIP
- 72211
- Mailing
- 13780 PERSIMMON LANE, HIWASSE, AR 72739
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 1741
- Employees
- 3
- Ownership type
- A
- Industry flags
- Construction safety.
Citations
14 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 17, 2001
- Abate by
- Sep 21, 2001
- Penalty
- Initial $1,500 · Current $1,500
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: At the Agape Church construction site located at 701 Napa Valley Drive, where the operator of the Terex Handlers, Straight Shooter, Model SS6360 rough terrain powered industrial truck, serial number 002744, was observed traveling throughout the area with his seat belt unbuckled. This practice exposed the operator to the hazard of being ejected and crushed by the machine in a roll-over accident. Among other methods, one feasible and acceptable abatement method to correct this hazard is to require the operator to wear his seat belt at all times when he is sitting in the seat of the powered industrial truck, regardless of the length of time that he will be in the seat, as warned by the manufacturer of the lift in a warning posted on the frame of the lift.
Recent events (2)
- — I (S) $1500.00
- — Z (S) $1500.00
1910.178 L01 II
- Issued
- Sep 17, 2001
- Abate by
- Oct 4, 2001
- Penalty
- Initial $1,500 · Current $1,500
Recent events (2)
- — I (S) $1500.00
- — Z (S) $1500.00
1926.451 B01
- Issued
- Sep 17, 2001
- Abate by
- Sep 21, 2001
- Penalty
- Initial $1,500 · Current $750 Reduced
Recent events (2)
- — I (S) $750.00
- — Z (S) $1500.00
1926.451 C01
- Issued
- Sep 17, 2001
- Abate by
- Sep 21, 2001
- Penalty
- Initial $1,500 · Current $750 Reduced
Recent events (2)
- — I (S) $750.00
- — Z (S) $1500.00
1926.451 F03
- Issued
- Sep 17, 2001
- Abate by
- Sep 21, 2001
- Penalty
- Initial $1,500 · Current $1,500
Recent events (2)
- — I (S) $1500.00
- — Z (S) $1500.00
1926.451 F04
- Issued
- Sep 17, 2001
- Abate by
- Sep 21, 2001
- Penalty
- Initial $1,500 · Current $1,500
Recent events (2)
- — I (S) $1500.00
- — Z (S) $1500.00
1926.451 G01
- Issued
- Sep 17, 2001
- Abate by
- Sep 21, 2001
- Penalty
- Initial $1,500 · Current $750 Reduced
Recent events (2)
- — I (S) $750.00
- — Z (S) $1500.00
1926.451 G04 I
- Issued
- Sep 17, 2001
- Abate by
- Sep 21, 2001
Recent events (2)
- — I (S)
- — Z (S)
1926.454 A
- Issued
- Sep 17, 2001
- Abate by
- Oct 4, 2001
- Penalty
- Initial $1,500
Recent events (2)
- — I (O)
- — Z (S) $1500.00
1926.454 B
- Issued
- Sep 17, 2001
- Abate by
- Oct 4, 2001
Recent events (2)
- — I (O)
- — Z (S)
5(a)(1)
- Issued
- Sep 17, 2001
- Abate by
- Sep 21, 2001
- Penalty
- Initial $1,500 · Current $750 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: At the Agape Church construction site located at 701 Napa Valley Drive, where the operator of the Terex Handlers, Straight Shooter, Model SS6360 rough terrain powered industrial truck, serial number 002744, was observed traveling throughout the area with his seat belt unbuckled. This practice exposed the operator to the hazard of being ejected and crushed by the machine in a roll-over accident. Among other methods, one feasible and acceptable abatement method to correct this hazard is to require the operator to wear his seat belt at all times when he is sitting in the seat of the powered industrial truck, regardless of the length of time that he will be in the seat, as warned by the manufacturer of the lift in a warning posted on the frame of the lift.
Recent events (2)
- — I (S) $750.00
- — Z (S) $1500.00
1910.178 L01 II
- Issued
- Sep 17, 2001
- Abate by
- Oct 4, 2001
- Penalty
- Initial $1,500
Recent events (2)
- — I (S)
- — Z (S) $1500.00
1926.451 F03
- Issued
- Sep 17, 2001
- Abate by
- Sep 21, 2001
- Penalty
- Initial $1,500 · Current $750 Reduced
Recent events (2)
- — I (S) $750.00
- — Z (S) $1500.00
1926.451 F04
- Issued
- Sep 17, 2001
- Abate by
- Sep 21, 2001
- Penalty
- Initial $1,500
Recent events (2)
- — I (S)
- — Z (S) $1500.00
More inspections at C & N Masonry
View C & N Masonry's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in AR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 117972547.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.