Rochester, NY ·
OSHA Inspection: TAYLOR INSTRUMENT PROCESS CONT
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of TAYLOR INSTRUMENT PROCESS CONT in 95 AMES STREET, Rochester, NY 14601 (NAICS 000000). OSHA activity number 11925369.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TAYLOR INSTRUMENT PROCESS CONT
- Site address
- 95 AMES STREET
- City
- Rochester
- State
- NY
- ZIP
- 14601
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 5065
- Employees
- 2150
Citations
21 citations on file for this inspection.
1910.219 D01
- Issued
- Feb 5, 1976
- Abate by
- Mar 8, 1976
- Penalty
- Initial $35 · Current $35
1910.215 A04
- Issued
- Feb 5, 1976
- Abate by
- Feb 16, 1976
- Penalty
- Initial $30 · Current $30
1910.215 B09
- Issued
- Feb 5, 1976
- Abate by
- Feb 16, 1976
- Penalty
- Initial $30 · Current $30
1910.157 A03
- Issued
- Feb 5, 1976
- Abate by
- Feb 16, 1976
1910.219 F03
- Issued
- Feb 5, 1976
- Abate by
- Feb 16, 1976
1910.219 C02 I
- Issued
- Feb 5, 1976
- Abate by
- Feb 23, 1976
1910.213 G01
- Issued
- Feb 5, 1976
- Abate by
- Mar 8, 1976
- Penalty
- Initial $30 · Current $30
1910.132 A
- Issued
- Feb 5, 1976
- Abate by
- Feb 16, 1976
- Penalty
- Initial $30 · Current $30
1910.309 A 025045
- Issued
- Feb 5, 1976
- Abate by
- Feb 16, 1976
1910.309 A 011017
- Issued
- Feb 5, 1976
- Abate by
- Feb 9, 1976
1910.37 Q05
- Issued
- Feb 5, 1976
- Abate by
- Mar 8, 1976
1910.37 F05
- Issued
- Feb 5, 1976
- Abate by
- Feb 16, 1976
- Penalty
- Initial $40 · Current $40
1910.252 A02 IVC
- Issued
- Feb 5, 1976
- Abate by
- Feb 16, 1976
- Penalty
- Initial $35 · Current $35
1910.212 A03 II
- Issued
- Feb 5, 1976
- Abate by
- Feb 23, 1976
- Penalty
- Initial $30 · Current $30
1910.212 A04
- Issued
- Feb 5, 1976
- Abate by
- Mar 8, 1976
1910.151 C
- Issued
- Feb 5, 1976
- Abate by
- Mar 8, 1976
- Penalty
- Initial $30 · Current $30
1910.23 D01
- Issued
- Feb 5, 1976
- Abate by
- Mar 8, 1976
1910.217 B04 I
- Issued
- Feb 5, 1976
- Abate by
- Feb 23, 1976
1910.106 E06 II
- Issued
- Feb 5, 1976
- Abate by
- Feb 16, 1976
- Penalty
- Initial $30 · Current $30
1904.2 A
- Issued
- Feb 5, 1976
- Abate by
- Feb 16, 1976
1904.5
- Issued
- Feb 5, 1976
- Abate by
- Feb 16, 1976
More inspections at Taylor Instrument Process Cont
View Taylor Instrument Process Cont's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 11925369.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.