MIDDLEPORT, OH —
OSHA Inspection: THE IMPERIAL ELECTRIC COMPANY
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of THE IMPERIAL ELECTRIC COMPANY in 345 SYCAMORE ST, MIDDLEPORT, OH 45760 (NAICS 000000). OSHA activity number 122057557.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THE IMPERIAL ELECTRIC COMPANY
- Site address
- 345 SYCAMORE ST
- City
- MIDDLEPORT
- State
- OH
- ZIP
- 45760
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3694
- Employees
- 65
- Ownership type
- A
Citations
9 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 6, 1999
- Abate by
- Nov 8, 1999
- Penalty
- Initial $2,250 · Current $1,575 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a struck-by hazard. a.In Dept. 37, the Aro overhead hoist, No. 23 had no markings for each of the operational buttons on the pendant control. b.In Dept. 34, the Cleveland Trumrail, overhead hoist, No. 13, had no markings on the operational buttons of the pendant control. Feasible and acceptable abatement methods to correct this hazard is to comply with the safe operating procedures recommended by ASME/ANSI B30. 16-1.1.2 such as (but not limited to): Permanently mark the directional mode of the operational buttons on the pendant controls.al
Recent events (2)
- — I (S) $1575.00
- — Z (S) $2250.00
5(a)(1)
- Issued
- Oct 6, 1999
- Abate by
- Nov 23, 1999
- Penalty
- Initial $2,250 · Current $1,575 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck by hazard. In the Tool and Die department, the Budgit overhead hoist, 1/2 ton capacity, was used to lift die weighing in range from 400-1200 pounds, had a rating marked 250 lb. capacity on the girder of the hoist and on the motor of the hoist a marking of 1000 lbs. Feasible and acceptable abatement methods to correct this hazard is to comply with the safe operating procedures recommended by ASME/ANSI B30. 16-1.1.1 such as (but not limited to): Contracting with a crane/hoist company to measure the capacity of the hoist.ty
Recent events (2)
- — I (S) $1575.00
- — Z (S) $2250.00
5(a)(1)
- Issued
- Oct 6, 1999
- Abate by
- Nov 23, 1999
- Penalty
- Initial $2,250 · Current $1,575 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck by hazard. At the workplace none of the overhead hoists had had annual inspections completed since 1993. Feasible and acceptable abatement methods to correct this hazard is to comply with the safe operating procedures recommended by ASME/ANSI B30.16-2.1.3 such as (but not limited to): Conduct regular and periodic inspection of each overhead hoist.ad
Recent events (2)
- — I (S) $1575.00
- — Z (S) $2250.00
5(a)(1)
- Issued
- Oct 6, 1999
- Abate by
- Nov 23, 1999
- Penalty
- Initial $4,500 · Current $3,150 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a struck by hazard. a. In Dept 34, the Cleveland Trumrail overhead hoist, No. 13, with a 1/2 ton capacity was used daily to lift armature casings weighing in range from 150-1400 lbs. b. In the Tool/Die Department, the Budgit overhead hoist, with a 1/2 ton capacity was used daily to lift die weighing in range from 400-1200 lbs. Feasible and acceptable abatement methods to correct this hazard is to comply with the safe operation procedures recommended by ASME/ANSI B30.16-3.1.2 such as (but not limited to): Purchasing larger capacity overhead hoists to handle the higher capacity loads.
Recent events (2)
- — I (S) $3150.00
- — Z (S) $4500.00
1910.147 C01
- Issued
- Oct 6, 1999
- Abate by
- Nov 23, 1999
- Penalty
- Initial $1,800 · Current $1,260 Reduced
Recent events (2)
- — I (S) $1260.00
- — Z (S) $1800.00
1910.147 C06 I
- Issued
- Oct 6, 1999
- Abate by
- Nov 23, 1999
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C07 I
- Issued
- Oct 6, 1999
- Abate by
- Nov 23, 1999
Recent events (2)
- — I (S)
- — Z (S)
1910.1200 G01
- Issued
- Oct 6, 1999
- Abate by
- Nov 8, 1999
- Penalty
- Initial $1,800 · Current $1,260 Reduced
Recent events (2)
- — I (S) $1260.00
- — Z (S) $1800.00
1904.2 A
- Issued
- Oct 6, 1999
- Abate by
- Nov 8, 1999
- Penalty
- Initial $900 · Current $630 Reduced
Recent events (2)
- — I (O) $630.00
- — Z (O) $900.00
More inspections at The Imperial Electric Company
View The Imperial Electric Company's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 122057557.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.