SEYMOUR, CT —
OSHA Inspection: XAMAX INDUSTRIES, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of XAMAX INDUSTRIES, INC in 63 SILVERMINE ROAD, SEYMOUR, CT 06483 (NAICS 322299). OSHA activity number 123190423.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Xamax Industries, INC — free
Get an email when a new federal OSHA severe-injury report for Xamax Industries, INC is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- XAMAX INDUSTRIES, INC
- Site address
- 63 SILVERMINE ROAD
- City
- SEYMOUR
- State
- CT
- ZIP
- 06483
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322299
- SIC code (legacy)
- 2621
- Employees
- 42
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
21 citations on file for this inspection.
5(a)(1)
- Issued
- Jan 15, 2008
- Abate by
- Feb 17, 2008
- Penalty
- Initial $1,250 · Current $813 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employmnent and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employee(s) were exposed to severe multipe fractures, broken bones, and amputations: WORKSHOP: The overhead hoists, such as (but not limited to) the CM Lodestar and Handling Systems had the following deficiencies: 1. CM Lodestar overhead 1/2 ton hoist at the Lever cutter: a. Spreader bar load rating was not marked or coded. 2. CM Lodestar overhead 1 ton hoist at the Cameron rewinder: a. Spreader bar load rating was not marked or coded. 3. CM Lodestar overhead 1 ton hoist at the Aero paper slitter, entrance area: a. Spreader bar load rating was not marked or coded. b. Safety latches were left open by tapping onto hook throats/openings. 4. CM Lodestar overhead 1 ton hoist at the Aero paper slitter, exit area: a. Spreader bar load rating was not marked or coded. b. Safety latches were left open by tapping onto hook throats/openings. 5. CM Lodestar overhead 2 ton hoist at the REM paper slitter, entrance area: a. Safety latches were left open by tapping onto hook throats/openings. 6. CM Lodestar overhead 1 ton hoist at the Fales paper slitter: a. Spreader bar load rating was not marked or coded. 7. Handling System Coffing rail 1/4 ton, jib hoist 1/2 ton at the #15 spooler: a. Spreader bar load rating was not marked or coded. Among other methods, one feasible and acceptable method to correct the hazard is to: 1. CM Lodestar overhead 1/2 ton hoist at the Lever cutter: a. Mark or code the spreader bar with appropriate load rating. 2. CM Lodestar overhead 1 ton hoist at the Cameron rewinder: a. Mark or code the spreader bar with appropriate load rating. 3. CM Lodestar overhead 1 ton hoist at the Aero paper slitter, entrance area: a. Mark or code the spreader bar with appropriate load rating. b. Remove the tape and ensure proper functioning of safety latches. 4. CM Lodestar overhead 1 ton hoist at the Aero paper slitter, exit area: a. Mark or code the spreader bar with appropraite load rating. b. Remove the tape and ensure proper functioning of safety latches.5. CM Lodestar overhead 2 ton hoist at the REM paper slitter, entrance area: a. Remove the tape and ensure proper functioning of safety latches. 6. CM Lodestar overhead 1 ton hoist at the Fales paper slitter: a. Mark or code the spread bar with appropriate load rating. 7. Handling System Coffing rail 1/4 ton, jib hoist 1/2 ton at the #15 spooler: a. Mark or code the spreader bar with appropriate load rating. 8. Follow The American National Standard Institute (ANSI)/The American Society of Mechanical Engineers (ASME) B30.16-1993; Overhead Hoist (Underhung) guide lines for inspections, maintenance, and operations of the overhead hoists. 9. Follow the manufacturer's operating instructions.
Recent events (2)
- — I (S) $812.50
- — Z (S) $1250.00
1910.132 D02
- Issued
- Jan 15, 2008
- Abate by
- Mar 17, 2008
- Penalty
- Initial $1,000 · Current $650 Reduced
Recent events (2)
- — I (S) $650.00
- — Z (S) $1000.00
1910.132 F01
- Issued
- Jan 15, 2008
- Abate by
- Mar 17, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C04 I
- Issued
- Jan 15, 2008
- Abate by
- Apr 17, 2008
- Penalty
- Initial $1,250 · Current $813 Reduced
Recent events (2)
- — I (S) $812.50
- — Z (S) $1250.00
1910.147 C07 I
- Issued
- Jan 15, 2008
- Abate by
- Apr 17, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.178 L04 III
- Issued
- Jan 15, 2008
- Abate by
- Feb 17, 2008
- Penalty
- Initial $1,000 · Current $650 Reduced
Recent events (2)
- — I (S) $650.00
- — Z (S) $1000.00
1910.184 H05 III
- Issued
- Jan 15, 2008
- Abate by
- Feb 2, 2008
- Penalty
- Initial $1,250 · Current $813 Reduced
Recent events (2)
- — I (S) $812.50
- — Z (S) $1250.00
1910.184 I01
- Issued
- Jan 15, 2008
- Abate by
- Feb 2, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.212 A01
- Issued
- Jan 15, 2008
- Abate by
- Feb 17, 2008
- Penalty
- Initial $1,250 · Current $813 Reduced
Recent events (2)
- — I (S) $812.50
- — Z (S) $1250.00
1910.212 A03 II
- Issued
- Jan 15, 2008
- Abate by
- Feb 17, 2008
- Penalty
- Initial $1,250 · Current $813 Reduced
Recent events (2)
- — I (S) $812.50
- — Z (S) $1250.00
1910.215 A02
- Issued
- Jan 15, 2008
- Abate by
- Feb 17, 2008
- Penalty
- Initial $1,000 · Current $650 Reduced
Recent events (2)
- — I (S) $650.00
- — Z (S) $1000.00
1910.215 A04
- Issued
- Jan 15, 2008
- Abate by
- Feb 17, 2008
- Penalty
- Initial $1,000 · Current $650 Reduced
Recent events (2)
- — I (S) $650.00
- — Z (S) $1000.00
1910.215 B09
- Issued
- Jan 15, 2008
- Abate by
- Feb 17, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.219 D01
- Issued
- Jan 15, 2008
- Abate by
- Feb 17, 2008
- Penalty
- Initial $1,000 · Current $650 Reduced
Recent events (2)
- — I (S) $650.00
- — Z (S) $1000.00
1910.219 E03 I
- Issued
- Jan 15, 2008
- Abate by
- Feb 17, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.219 F03
- Issued
- Jan 15, 2008
- Abate by
- Feb 17, 2008
- Penalty
- Initial $1,250 · Current $813 Reduced
Recent events (2)
- — I (S) $812.50
- — Z (S) $1250.00
1910.1200 E01
- Issued
- Jan 15, 2008
- Abate by
- Feb 17, 2008
- Penalty
- Initial $750 · Current $475 Reduced
Recent events (2)
- — I (S) $475.00
- — Z (S) $750.00
1910.1200 E01 I
- Issued
- Jan 15, 2008
- Abate by
- Feb 17, 2008
Recent events (2)
- — I (S)
- — Z (S)
1904.29 B01
- Issued
- Jan 15, 2008
- Abate by
- Feb 17, 2008
- Penalty
- Initial $500 · Current $325 Reduced
Recent events (2)
- — I (O) $325.00
- — Z (O) $500.00
1904.32 A02
- Issued
- Jan 15, 2008
- Abate by
- Feb 17, 2008
- Penalty
- Initial $500 · Current $325 Reduced
Recent events (2)
- — I (O) $325.00
- — Z (O) $500.00
1910.178 P01
- Issued
- Jan 15, 2008
- Abate by
- Feb 17, 2008
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Xamax Industries, INC
View Xamax Industries, INC's full OSHA safety record →
More inspections in this industry (NAICS 322299)
Jul 14, 2026
Keiding, INC. · MILWAUKEE, WI
Jun 30, 2026
Ppg/Cindus Corporation · CINCINNATI, OH
Jun 29, 2026
Georgia Pacific LLC · TRACY, CA
Jun 23, 2026
Ppg/Cindus Corporation · CINCINNATI, OH
Jun 16, 2026
Worcester Envelope Company · AUBURN, MA
More inspections in CT
Jul 16, 2026
Bianco & Sons, LLC · EAST HAVEN, CT
Jul 16, 2026
Moms Enfield · ENFIELD, CT
Jul 16, 2026
Harbor Freight · DAYVILLE, CT
Jul 14, 2026
Jananii, LLC · NEW BRITAIN, CT
Jul 14, 2026
Truss Manufacturing INC · NEWINGTON, CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 123190423.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.