GONZALES, TX ·
OSHA Inspection: PATTERSON DRILLING CO., INC.
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of PATTERSON DRILLING CO., INC. in TEXAS TWO STEP - 20 MI S OF GONZALES, GONZALES, TX 78629 (NAICS 000000). OSHA activity number 123431025.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PATTERSON DRILLING CO., INC.
- Site address
- TEXAS TWO STEP - 20 MI S OF GONZALES
- City
- GONZALES
- State
- TX
- ZIP
- 78629
- Mailing
- P.O. DRAWER 1416, SNYDER, TX 79549
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 1381
- Employees
- 17
- Ownership type
- Private (A)
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- Mar 31, 1993
- Abate by
- Apr 15, 1993
- Penalty
- Initial $4,000 · Current $4,000
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: (a) The hazard of being struck and crushed by the Kelly and swivel when the Bill Hook opened and released the Kelly and swivel on or about February 7, 1993. The employees were in the process of jarring pipe on a horizontal well. One feasible and acceptable abatement method, among others, to correct these hazard(s) would be to enforce and establish the following procedures: (1) Have Bill Hook and Block latch assembly repaired; (2) Develop written procedures on maintenance of Bill Hook latch following manufacturing recommendations. (3) Develop an inspection program by the driller at every shift change.
Recent events (2)
- · F (S) $4000.00
- · Z (S) $4000.00
1910.23 A10
- Issued
- Mar 31, 1993
- Abate by
- Apr 8, 1993
- Penalty
- Initial $1,200 · Current $400 Reduced
Recent events (2)
- · F (O) $400.00
- · Z (S) $1200.00
1910.27 B01 IV
- Issued
- Mar 31, 1993
- Abate by
- Apr 8, 1993
- Penalty
- Initial $1,600 · Current $250 Reduced
Recent events (2)
- · F (S) $250.00
- · Z (S) $1600.00
1910.27 F
- Issued
- Mar 31, 1993
- Abate by
- Apr 8, 1993
- Penalty
- Initial $2,000 · Current $250 Reduced
Recent events (2)
- · F (S) $250.00
- · Z (S) $2000.00
1910.184 E01
- Issued
- Mar 31, 1993
- Abate by
- Apr 22, 1993
- Penalty
- Initial $1,600 · Current $1,600
Recent events (2)
- · F (S) $1600.00
- · Z (S) $1600.00
1910.1030 C01 I
- Issued
- Mar 31, 1993
- Abate by
- Apr 22, 1993
- Penalty
- Initial $1,200 · Current $1,200
Recent events (2)
- · F (S) $1200.00
- · Z (S) $1200.00
1910.1030 G02 I
- Issued
- Mar 31, 1993
- Abate by
- Apr 22, 1993
- Penalty
- Initial $1,200 · Current $1,200
Recent events (2)
- · F (S) $1200.00
- · Z (S) $1200.00
1910.1200 H
- Issued
- Mar 31, 1993
- Abate by
- Apr 22, 1993
- Penalty
- Initial $1,200 · Current $400 Reduced
Recent events (2)
- · F (S) $400.00
- · Z (S) $1200.00
1904.5 B
- Issued
- Mar 31, 1993
- Abate by
- Apr 7, 1993
- Penalty
- Initial $800 · Current $400 Reduced
Recent events (2)
- · F (O) $400.00
- · Z (O) $800.00
1910.141 B01 VI
- Issued
- Mar 31, 1993
- Abate by
- Apr 7, 1993
Recent events (2)
- · F (O)
- · Z (O)
More inspections at Patterson Drilling CO., INC.
View Patterson Drilling CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 123431025.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.