CIDRA, PR —
OSHA Inspection: SAN JUAN PLASTIC MANUFACTURERS COMPANY INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SAN JUAN PLASTIC MANUFACTURERS COMPANY INC in CARR 1 KM 49.0 BO BEATRIZ, CIDRA, PR 00736 (NAICS 000000). OSHA activity number 126918739.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SAN JUAN PLASTIC MANUFACTURERS COMPANY INC
- Site address
- CARR 1 KM 49.0 BO BEATRIZ
- City
- CIDRA
- State
- PR
- ZIP
- 00736
- Mailing
- PO BOX 360949, SAN JUAN, PR 00936
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3089
- Employees
- 96
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
11 citations on file for this inspection.
6A0001
- Issued
- Jul 31, 1998
- Abate by
- Aug 7, 1998
- Penalty
- Initial $900 · Current $540 Reduced
General-duty citation text
Section 6(a) of the Puerto Rico Occupational Safety and Health Act: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or physical harm to employees in that employees were exposed to: Seccion 6(a) de la Ley de Seguridad y Salud en el Trabajo de Puerto Rico: El patrono no proveyo empleo y un sitio de empleo libre de riesgos reconocidos que esten causando o que puedan causar muerte o dano fisico a los empleados, por cuanto empleados estaban expuestos a: At the extrusion area - it was observed a powered industrial truck Yale EATON Modelo ERCO30AAN365T083, S/N N356534, with load capacity of 3,700 pounds, which one was not equipped with warnings devices when that were drived. Among other methods, one feasible and acceptable method to correct this hazard is to provide a horn or sound producing or visual devices such as, lights, whistle or back up alarm. Hazard: Stroke to employees. En el area de extrusion - fue observado un vehiculo industrial Yale EATON Modelo ERCO30AAN365T083, S/N N356534, con capacidad de carga de 3,700 libras, el cual no estaba equipado con aparatos de advertencia cuando estos eran conducidos. Entre otros metodos, un metodo accesible y aceptable para corregir este riesgo es proveer una bocina o algun artefacto que produzca advertencia auditiva o visual, tal como luces, silbato o alarma de retroceso. Riesgo: Golpe a empleados.
Recent events (2)
- — I (S) $540.00
- — Z (S) $900.00
1910.147 C01
- Issued
- Jul 31, 1998
- Abate by
- Sep 17, 1998
- Penalty
- Initial $900 · Current $900
1910.253 E03 IIC3
- Issued
- Jul 31, 1998
- Abate by
- Aug 6, 1998
- Penalty
- Initial $1,200 · Current $720 Reduced
Recent events (2)
- — I (S) $720.00
- — Z (S) $1200.00
6A0001
- Issued
- Jul 31, 1998
- Abate by
- Aug 7, 1998
- Penalty
- Initial $600 · Current $360 Reduced
General-duty citation text
Section 6(a) of the Puerto Rico Occupational Safety and Health Act: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or physical harm to employees in that employees were exposed to: Seccion 6(a) de la Ley de Seguridad y Salud en el Trabajo de Puerto Rico: El patrono no proveyo empleo y un sitio de empleo libre de riesgos reconocidos que esten causando o que puedan causar muerte o dano fisico a los empleados, por cuanto empleados estaban expuestos a: At the conversion machines area - the hook of a electric chain hoist of load capacity of 1 ton was not equipped with safety latch for purpose of retaining slings and chains according to ASME/ANSI B30.10a-1990-10-1.2.3. Hazard: the sling or chain can get out from hook due to sudden movements. En el area de maquinas de conversion - el gancho del equipo de izar de cadenas de capacidad de carga de 1 tonelada no fue equipada con un cerrojo de seguridad para proposito de retener eslingas y cadenas segun ASME/ANSI B30.10a - 1990-10-1.2.3. Riesgo: la eslinga o cadena puede salirse del gancho debido a moviminetos inesperados.
Recent events (2)
- — I (O) $360.00
- — Z (O) $600.00
1910.178 L
- Issued
- Jul 31, 1998
- Abate by
- Sep 17, 1998
- Penalty
- Initial $600 · Current $600
1910.179 J02 III
- Issued
- Jul 31, 1998
- Abate by
- Aug 7, 1998
- Penalty
- Initial $600 · Current $360 Reduced
Recent events (2)
- — I (O) $360.00
- — Z (O) $600.00
1910.179 J02 IV
- Issued
- Jul 31, 1998
- Abate by
- Aug 7, 1998
1910.184 D
- Issued
- Jul 31, 1998
- Abate by
- Aug 7, 1998
1910.303 F
- Issued
- Jul 31, 1998
- Abate by
- Aug 7, 1998
1910.305 B01
- Issued
- Jul 31, 1998
- Abate by
- Aug 7, 1998
1910.1200 E01
- Issued
- Jul 31, 1998
- Abate by
- Sep 17, 1998
More inspections at SAN Juan Plastic Manufacturers Company INC
View SAN Juan Plastic Manufacturers Company INC's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in PR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 126918739.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.