Oklahoma City, OK —
OSHA Inspection: J P MACHINE & TOOL CO I
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of J P MACHINE & TOOL CO I in 1534 SOUTHEAST 29TH, Oklahoma City, OK 73129 (NAICS 000000). OSHA activity number 16890576.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J P MACHINE & TOOL CO I
- Site address
- 1534 SOUTHEAST 29TH
- City
- Oklahoma City
- State
- OK
- ZIP
- 73129
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3533
- Employees
- 21
- Industry flags
- Manufacturing safety.
Citations
18 citations on file for this inspection.
1910.212 A01
- Issued
- Nov 3, 1976
- Abate by
- Dec 17, 1976
- Penalty
- Initial $25 · Current $25
1910.212 A03 II
- Issued
- Nov 3, 1976
- Abate by
- Nov 26, 1976
1910.212 A05
- Issued
- Nov 3, 1976
- Abate by
- Nov 26, 1976
1910.215 A02
- Issued
- Nov 3, 1976
- Abate by
- Nov 26, 1976
- Penalty
- Initial $25 · Current $25
1910.215 A04
- Issued
- Nov 3, 1976
- Abate by
- Nov 15, 1976
1910.215 B09
- Issued
- Nov 3, 1976
- Abate by
- Nov 15, 1976
1910.219 D01
- Issued
- Nov 3, 1976
- Abate by
- Nov 26, 1976
- Penalty
- Initial $25 · Current $25
1910.219 E01 I
- Issued
- Nov 3, 1976
- Abate by
- Nov 26, 1976
1910.219 E03 I
- Issued
- Nov 3, 1976
- Abate by
- Nov 26, 1976
1910.242 B
- Issued
- Nov 3, 1976
- Abate by
- Nov 15, 1976
1910.252 A01 III
- Issued
- Nov 3, 1976
- Abate by
- Nov 15, 1976
1910.252 A02 IVC
- Issued
- Nov 3, 1976
- Abate by
- Nov 15, 1976
- Penalty
- Initial $25 · Current $25
1910.309 A 011017
- Issued
- Nov 3, 1976
- Abate by
- Nov 15, 1976
1910.309 A 011017
- Issued
- Nov 3, 1976
- Abate by
- Nov 15, 1976
1910.309 A 011022
- Issued
- Nov 3, 1976
- Abate by
- Nov 15, 1976
1910.309 A 025045
- Issued
- Nov 3, 1976
- Abate by
- Nov 15, 1976
- Penalty
- Initial $40 · Current $40
1910.309 A 025051
- Issued
- Nov 3, 1976
- Abate by
- Nov 15, 1976
- Penalty
- Initial $40 · Current $40
1910.309 A 040004
- Issued
- Nov 3, 1976
- Abate by
- Nov 15, 1976
More inspections at J P Machine & Tool CO I
View J P Machine & Tool CO I's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 16890576.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.