Tulsa, OK ·
OSHA Inspection: CENTRAL MILL & FIXTURE INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CENTRAL MILL & FIXTURE INC in 2408 NORTH LEWIS, Tulsa, OK 74110 (NAICS 000000). OSHA activity number 17057506.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CENTRAL MILL & FIXTURE INC
- Site address
- 2408 NORTH LEWIS
- City
- Tulsa
- State
- OK
- ZIP
- 74110
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2541
- Employees
- 90
- Industry flags
- Manufacturing safety.
Citations
25 citations on file for this inspection.
1910.22 A01
- Issued
- Jan 30, 1975
- Abate by
- Feb 26, 1975
1910.24 H
- Issued
- Jan 30, 1975
- Abate by
- Feb 26, 1975
1910.37 J
- Issued
- Jan 30, 1975
- Abate by
- Mar 19, 1975
1910.37 K02
- Issued
- Jan 30, 1975
- Abate by
- Feb 6, 1975
1910.107 B01
- Issued
- Jan 30, 1975
- Abate by
- Mar 19, 1975
1910.107 B05 I
- Issued
- Jan 30, 1975
- Abate by
- Mar 19, 1975
1910.107 B05 IV
- Issued
- Jan 30, 1975
- Abate by
- Mar 19, 1975
1910.141 A03 I
- Issued
- Jan 30, 1975
- Abate by
- Feb 6, 1975
1910.141 C01 V
- Issued
- Jan 30, 1975
- Abate by
- Feb 26, 1975
1910.141 D02 II
- Issued
- Jan 30, 1975
- Abate by
- Feb 26, 1975
1910.141 D02 III
- Issued
- Jan 30, 1975
- Abate by
- Feb 6, 1975
1910.141 D02 V
- Issued
- Jan 30, 1975
- Abate by
- Feb 6, 1975
1910.213 C01
- Issued
- Jan 30, 1975
- Abate by
- Feb 26, 1975
1910.213 C02
- Issued
- Jan 30, 1975
- Abate by
- Feb 26, 1975
1910.213 C03
- Issued
- Jan 30, 1975
- Abate by
- Feb 26, 1975
1910.213 H01
- Issued
- Jan 30, 1975
- Abate by
- Feb 26, 1975
1910.213 I01
- Issued
- Jan 30, 1975
- Abate by
- Feb 26, 1975
1910.213 M01
- Issued
- Jan 30, 1975
- Abate by
- Feb 26, 1975
- Penalty
- Initial $25 · Current $25
1910.213 H04
- Issued
- Jan 30, 1975
- Abate by
- Feb 26, 1975
1910.107 G02
- Issued
- Jan 30, 1975
- Abate by
- Mar 19, 1975
- Penalty
- Initial $315 · Current $315
1910.212 A03 II
- Issued
- Jan 30, 1975
- Abate by
- Mar 19, 1975
- Penalty
- Initial $80 · Current $80
1910.213 C01
- Issued
- Jan 30, 1975
- Abate by
- Feb 26, 1975
- Penalty
- Initial $80 · Current $80
1910.106
- Issued
- Jan 30, 1975
- Abate by
- Feb 26, 1975
- Penalty
- Initial $500 · Current $500
1910.106 E06 I
- Issued
- Jan 30, 1975
- Abate by
- Feb 26, 1975
1910.106 E07 IA0
- Issued
- Jan 30, 1975
- Abate by
- Feb 26, 1975
More inspections at Central Mill & Fixture INC
View Central Mill & Fixture INC's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 17057506.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.