Omaha, NE ·
OSHA Inspection: CENTRAL STATES TOOL & DIE WORK
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CENTRAL STATES TOOL & DIE WORK in 4301 19 NO 30TH ST, Omaha, NE 68111 (NAICS 000000). OSHA activity number 17224163.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CENTRAL STATES TOOL & DIE WORK
- Site address
- 4301 19 NO 30TH ST
- City
- Omaha
- State
- NE
- ZIP
- 68111
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3460
- Employees
- 80
- Industry flags
- Manufacturing safety.
Citations
17 citations on file for this inspection.
1910.252 B04 IXC0
- Issued
- Feb 6, 1974
- Abate by
- Feb 7, 1974
1910.252 C02 VI
- Issued
- Feb 6, 1974
- Abate by
- Feb 19, 1974
- Penalty
- Initial $25 · Current $25
1910.212 A01
- Issued
- Feb 6, 1974
- Abate by
- Mar 1, 1974
- Penalty
- Initial $135 · Current $135
1910.106 E06 I
- Issued
- Feb 6, 1974
- Abate by
- Feb 19, 1974
- Penalty
- Initial $25 · Current $25
1910.106 E02 IVD0
- Issued
- Feb 6, 1974
- Abate by
- Feb 19, 1974
- Penalty
- Initial $25 · Current $25
1910.219 B01
- Issued
- Feb 6, 1974
- Abate by
- Mar 22, 1974
- Penalty
- Initial $110 · Current $110
1910.219 D01
- Issued
- Feb 6, 1974
- Abate by
- Mar 1, 1974
- Penalty
- Initial $55 · Current $55
1910.219 I02
- Issued
- Feb 6, 1974
- Abate by
- Feb 19, 1974
- Penalty
- Initial $25 · Current $25
1910.215 A04
- Issued
- Feb 6, 1974
- Abate by
- Feb 19, 1974
1910.106 D04 I
- Issued
- Feb 6, 1974
- Abate by
- Mar 22, 1974
- Penalty
- Initial $40 · Current $40
1910.106 D04 III
- Issued
- Feb 6, 1974
- Abate by
- Mar 22, 1974
- Penalty
- Initial $40 · Current $40
1910.106 D04 IV
- Issued
- Feb 6, 1974
- Abate by
- Mar 22, 1974
- Penalty
- Initial $40 · Current $40
1910.107 C06
- Issued
- Feb 6, 1974
- Abate by
- Mar 22, 1974
- Penalty
- Initial $135 · Current $135
1910.107 B05 I
- Issued
- Feb 6, 1974
- Abate by
- Mar 22, 1974
- Penalty
- Initial $40 · Current $40
1910.107 B01
- Issued
- Feb 6, 1974
- Abate by
- Feb 7, 1974
- Penalty
- Initial $55 · Current $55
1910.134 A02
- Issued
- Feb 6, 1974
- Abate by
- Feb 19, 1974
- Penalty
- Initial $25 · Current $25
1910.212 A03 II
- Issued
- Feb 6, 1974
- Abate by
- Sep 20, 1974
- Penalty
- Initial $550 · Current $550
More inspections at Central States Tool & DIE Work
View Central States Tool & DIE Work's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 17224163.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.