ERIE, PA ·
OSHA Inspection: PROGRESSIVE TECHNOLOGY INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PROGRESSIVE TECHNOLOGY INC. in 2114 LOVELAND AVENUE, ERIE, PA 16506 (NAICS 000000). OSHA activity number 17472846.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PROGRESSIVE TECHNOLOGY INC.
- Site address
- 2114 LOVELAND AVENUE
- City
- ERIE
- State
- PA
- ZIP
- 16506
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3089
- Employees
- 20
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
18 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 7, 1986
- Abate by
- Dec 15, 1986
- Penalty
- Initial $120 · Current $80 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) Serious cuts from inadvertent contact with the rotating cutting blades while freeing the cutting areas of the four bag machines from jams. Among other methods, one feasible, and acceptable abatement method to correct this hazard is to establish and enforce an adequate plant lockout procedure which would include the following essentials: 1) Requirement for shutting off the machines before unjamming material at the cutting ends for daily operational crews be established, in writing with training as needed; 2) Open and lockout the main power disconnect for the machines and bleeding off of any residual energy by maintenance crews for major problems; 3) Provide each potentially exposed employee working on the machines with a separate lock and key to be placed in the lockout means if needed; 4) Periodically evaluate the program and strictly enforce all its provisions.
Recent events (2)
- · I (S) $80.00
- · Z (S) $120.00
1910.212 A01
- Issued
- Oct 7, 1986
- Abate by
- Nov 7, 1986
- Penalty
- Initial $40 · Current $40
1910.219 F03
- Issued
- Oct 7, 1986
- Abate by
- Oct 31, 1986
- Penalty
- Initial $80 · Current $80
1910.1200 E01
- Issued
- Oct 7, 1986
- Abate by
- Dec 15, 1986
- Penalty
- Initial $200 · Current $100 Reduced
Recent events (2)
- · I (S) $100.00
- · Z (S) $200.00
1910.1200 F04 I
- Issued
- Oct 7, 1986
- Abate by
- Dec 15, 1986
Recent events (2)
- · I (S)
- · Z (S)
1910.1200 F04 II
- Issued
- Oct 7, 1986
- Abate by
- Dec 15, 1986
Recent events (2)
- · I (S)
- · Z (S)
1910.1200 H01
- Issued
- Oct 7, 1986
- Abate by
- Dec 15, 1986
Recent events (2)
- · I (S)
- · Z (S)
1903.2 A01
- Issued
- Oct 7, 1986
- Abate by
- Oct 10, 1986
1904.2 A
- Issued
- Oct 7, 1986
- Abate by
- Nov 7, 1986
1904.5 A
- Issued
- Oct 7, 1986
- Abate by
- Nov 7, 1986
1910.20 G01 I
- Issued
- Oct 7, 1986
- Abate by
- Dec 15, 1986
Recent events (2)
- · I (O)
- · Z (O)
1910.20 G01 II
- Issued
- Oct 7, 1986
- Abate by
- Dec 15, 1986
Recent events (2)
- · I (O)
- · Z (O)
1910.20 G01 III
- Issued
- Oct 7, 1986
- Abate by
- Dec 15, 1986
Recent events (2)
- · I (O)
- · Z (O)
1910.20 G02
- Issued
- Oct 7, 1986
- Abate by
- Dec 15, 1986
Recent events (2)
- · I (O)
- · Z (O)
1910.95 C01
- Issued
- Oct 7, 1986
- Abate by
- Dec 15, 1986
8111
Recent events (2)
- · I (O)
- · Z (O)
1910.95 D01
- Issued
- Oct 7, 1986
- Abate by
- Dec 15, 1986
8111
Recent events (2)
- · I (O)
- · Z (O)
1910.132 A
- Issued
- Oct 7, 1986
- Abate by
- Nov 7, 1986
1910.157 G01
- Issued
- Oct 7, 1986
- Abate by
- Nov 7, 1986
More inspections at Progressive Technology INC.
View Progressive Technology INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 17472846.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.