SHARPSBURG, PA —
OSHA Inspection: HENRY MILLER SPRING & MANUFACTURING COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HENRY MILLER SPRING & MANUFACTURING COMPANY in ALI STREET, SHARPSBURG, PA 15215 (NAICS 000000). OSHA activity number 17479155.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HENRY MILLER SPRING & MANUFACTURING COMPANY
- Site address
- ALI STREET
- City
- SHARPSBURG
- State
- PA
- ZIP
- 15215
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3493
- Employees
- 45
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
14 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 1, 1987
- Abate by
- Dec 18, 1987
- Penalty
- Initial $300 · Current $300
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that: a) Production area and areas where lifting and/or pushing and/or pulling are required were exposed to body - mechanical (musculoskeletal) injuries. A feasible and useful method to correct the hazards, among other methods is the periodic comprehensive training and supervision of all exposed employees in body mechanics, manual lifting and team lifting techniques and in the utilization of lifting and movement assistance devices. A feasible and useful method to correct the hazard, among other methods, is the periodic comprehensive training and supervision of all exposed employees in body mechanics, manual lifting and team lifting techniques and in the utilization of lifting and movement assistance devices. *Step 1: Implement a training program in body mechanics and lifting techniques for all employees exposed to the hazard as an interim protective measure. *Step 2: Submit to the Area Director a written detailed plan of abatement outlining a schedule for the implementation of engineering and/or administrative measures to control employee exposure to injuries as referenced in this citation. The dates for the following actions should be consistent with the abatement dates required by this citation: 1) Evaluation of the conditions, locations, and the activities that the employees are engaged in at the onset of injuries. 2) Evaluation of applicable control measure(s). 3) Periodic training of employees in the applicable control measure(s). 4) A monitoring method to assure effective utilization of the control measure(s). *Step 3: Correction shall be completed by the implementation of the detailed plan of abatement.
Recent events (3)
- — P (S) $300.00
- — I (S) $300.00
- — Z (S) $300.00
1910.132 A
- Issued
- Jul 1, 1987
- Abate by
- Aug 3, 1987
- Penalty
- Initial $360 · Current $200 Reduced
Recent events (2)
- — I (S) $200.00
- — Z (S) $360.00
1910.184 D
- Issued
- Jul 1, 1987
- Abate by
- Aug 3, 1987
- Penalty
- Initial $240 · Current $120 Reduced
Recent events (2)
- — I (S) $120.00
- — Z (S) $240.00
1910.184 E03 I
- Issued
- Jul 1, 1987
- Abate by
- Aug 3, 1987
1910.184 E07 I
- Issued
- Jul 1, 1987
- Abate by
- Aug 3, 1987
1910.213 H01
- Issued
- Jul 1, 1987
- Abate by
- Aug 3, 1987
- Penalty
- Initial $240 · Current $160 Reduced
Recent events (2)
- — I (S) $160.00
- — Z (S) $240.00
1910.213 H03
- Issued
- Jul 1, 1987
- Abate by
- Aug 3, 1987
1910.213 H04
- Issued
- Jul 1, 1987
- Abate by
- Aug 3, 1987
1910.108 F01
- Issued
- Jul 1, 1987
- Abate by
- Jul 10, 1987
1910.157 C01
- Issued
- Jul 1, 1987
- Abate by
- Jul 24, 1987
1910.157 G01
- Issued
- Jul 1, 1987
- Abate by
- Jul 24, 1987
1910.178 L
- Issued
- Jul 1, 1987
- Abate by
- Aug 21, 1987
Recent events (2)
- — I (O)
- — Z (O)
1910.215 A04
- Issued
- Jul 1, 1987
- Abate by
- Jul 10, 1987
1910.252 A01 III
- Issued
- Jul 1, 1987
- Abate by
- Jul 10, 1987
More inspections in this industry (NAICS 000000)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 17479155.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.