FRACKVILLE, PA ·
OSHA Inspection: ST JUDE POLYMER CORP
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ST JUDE POLYMER CORP in 110 INDUSTRIAL PARK, FRACKVILLE, PA 17931 (NAICS 000000). OSHA activity number 17616319.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ST JUDE POLYMER CORP
- Site address
- 110 INDUSTRIAL PARK
- City
- FRACKVILLE
- State
- PA
- ZIP
- 17931
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3089
- Employees
- 100
- Ownership type
- Private (A)
Citations
19 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 26, 1994
- Abate by
- Nov 28, 1994
- Penalty
- Initial $875 · Current $400 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: multiple injuries from a falling hazard when employees are elevated on a platform used with a powered industrial truck and the platform is not provided with a standard guardrail system including a midrail. The following are feasible and acceptable abatement methods: 1.Platform must be secured to the lifting carriage and/or forks. 2.Platform must have a slip resistant surface. 3.Platform must be equipped with a standard guardrail system as follows: a. System to consist of toprail, midrail and toeboard. b. Toprail positioned with a vertical height of between 39 and 45 inches above the surface of the platform. Rope chain, etc. used in place of solid railing not be able to be deflected more than 3 inches outward when a 200 pound force is applied and downward deflection to assure vertical height does not go below 39 inches. c. Midrail be positioned about 1/2 way between platform surface and uppermost surface of top guardrail. d. Access opening through the guardrail system be protected by a device providing equivalent protection of the guardrail system. 4.Operator to be in the control position of the powered truck when personnel elevated. 5.Overhead protection is mandatory for the powered truck and, if required by operating conditions, the platform. 6.When the moving parts of the truck represent a hazard, means must be provided to protect personnel in the normal working position. 7.Workers are to be instructed to keep their feet on the surface of the platform so as not to negate the protective guardrail system.il
Recent events (2)
- · I (S) $400.00
- · Z (S) $875.00
1910.23 C01
- Issued
- Oct 26, 1994
- Abate by
- Nov 13, 1994
- Penalty
- Initial $525 · Current $265 Reduced
Recent events (2)
- · I (S) $265.00
- · Z (S) $525.00
1910.37 F06
- Issued
- Oct 26, 1994
- Abate by
- Nov 28, 1994
- Penalty
- Initial $525 · Current $265 Reduced
Recent events (2)
- · I (S) $265.00
- · Z (S) $525.00
1910.37 I
- Issued
- Oct 26, 1994
- Abate by
- Nov 28, 1994
1910.132 A
- Issued
- Oct 26, 1994
- Abate by
- Nov 13, 1994
- Penalty
- Initial $525 · Current $265 Reduced
Recent events (2)
- · I (S) $265.00
- · Z (S) $525.00
1910.147 C04 I
- Issued
- Oct 26, 1994
- Abate by
- Nov 28, 1994
- Penalty
- Initial $700 · Current $100 Reduced
Recent events (2)
- · I (S) $100.00
- · Z (S) $700.00
1910.147 C06 II
- Issued
- Oct 26, 1994
- Abate by
- Nov 28, 1994
1910.151 C
- Issued
- Oct 26, 1994
- Abate by
- Nov 21, 1994
- Penalty
- Initial $525 · Current $325 Reduced
Recent events (2)
- · I (S) $325.00
- · Z (S) $525.00
1910.212 A01
- Issued
- Oct 26, 1994
- Abate by
- Nov 21, 1994
- Penalty
- Initial $700 · Current $700
1910.212 A03 II
- Issued
- Oct 26, 1994
- Abate by
- Nov 30, 1994
- Penalty
- Initial $700 · Current $700
1910.303 B01
- Issued
- Oct 26, 1994
- Abate by
- Dec 12, 1994
- Penalty
- Initial $875 · Current $400 Reduced
Recent events (2)
- · I (S) $400.00
- · Z (S) $875.00
1910.95 G06
- Issued
- Oct 26, 1994
- Abate by
- Dec 30, 1994
Recent events (2)
- · I (O)
- · Z (O)
1910.146 C01
- Issued
- Oct 26, 1994
- Abate by
- Dec 30, 1994
Recent events (2)
- · I (O)
- · Z (O)
1910.146 C02
- Issued
- Oct 26, 1994
- Abate by
- Dec 30, 1994
Recent events (2)
- · I (O)
- · Z (O)
1910.253 B04 III
- Issued
- Oct 26, 1994
- Abate by
- Nov 21, 1994
1910.303 G01 III
- Issued
- Oct 26, 1994
- Abate by
- Oct 31, 1994
1910.304 F04
- Issued
- Oct 26, 1994
- Abate by
- Oct 31, 1994
1910.305 B01
- Issued
- Oct 26, 1994
- Abate by
- Oct 31, 1994
1910.1200 F05
- Issued
- Oct 26, 1994
- Abate by
- Oct 31, 1994
More inspections at ST Jude Polymer Corp
View ST Jude Polymer Corp's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 17616319.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.