JOHNSTON, RI ·
OSHA Inspection: QUALITEX, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of QUALITEX, INC. in 19 INDUSTRIAL LANE, JOHNSTON, RI 02919 (NAICS 000000). OSHA activity number 18260893.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- QUALITEX, INC.
- Site address
- 19 INDUSTRIAL LANE
- City
- JOHNSTON
- State
- RI
- ZIP
- 02919
- Mailing
- P.O. BOX 7008, JOHNSTON, RI 02919
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Union (A)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3069
- Employees
- 87
- Ownership type
- Private (A)
- Industry flags
- Manufacturing safety.
Citations
26 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 10, 1988
- Abate by
- Nov 4, 1988
- Penalty
- Initial $480 · Current $480
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employee which were free from recognized hazards that were causing or likely to cause death or serious physical harm to emploees in that employees were exposed to serious injury from lifting tasks without administative or engineering controls: a) Extrustion Area-lines 1, 2, 3 and 4: The lifting tasks entailed the following steps: 1) Employees were required to pull boxes from extrusion lines over to a scale. 2) Employees were then required to lift these boxes up onto the scale. 3) In the case of lines 2 and 3, employees were required to lift the boxes off the scale and onto the floor. They then pulled the boxes over to a pallet and lifted the boxes onto the pallet. Employees on lines 1 and 4 lifted the boxes directly from the scale onto the pallet. The evaluation of this manual lifting task indicates that employees are exposed to an increased risk of musculoskeletal injuries in populations exposed to similar conditions. The injury and illness records for 1986 and 1987 documented that there was a pattern of musculoskeletal/overexertion injuries. Step 1- Effective administrative protection, such as employee training, physical assessment, job rotation, etc. shall be provided as an interim protective measure until feasible engineering or permanent administrative controls can be implemented which will reduce employee exposure to nominal risk. Step 2 - Submit to the Area Director a written detailed plan of abatement outlining a schedule for the implementation of engineering or administrative measures to control employee injury due to manual lifting tasks. Engineering controls to reduce musculoskeletal stress include, but are not limited to job redesign, reduction of the horizontal and vertical load distance from the body, reduction of the lifting frequency or weight, and use of mechanical lifting aids. This plan shall include at a minimum, target dates for the following actions which must be consistent with the dates required by this citation. 1) Evaluation of the conditions, locations and manual lifting activities that the employees are performing at the onset of musculoskeletal injuries. 2) Evaluation of applicable control measure(s). 3) Procurement, installation and operation of selected control measures. 4) Monitoring to assure effective utilization of the control measure(s). Step 3 - Abatement shall have been completed by implementation of feasible engineering or administrative controls, upon verification of their effectiveness in reducing the occurrence of musculoskeletal injuries.
1910.23 C01
- Issued
- Aug 10, 1988
- Abate by
- Aug 13, 1988
- Penalty
- Initial $160 · Current $160
1910.151 C
- Issued
- Aug 10, 1988
- Abate by
- Aug 16, 1988
- Penalty
- Initial $80 · Current $80
1910.212 A01
- Issued
- Aug 10, 1988
- Abate by
- Sep 14, 1988
- Penalty
- Initial $160 · Current $160
1910.212 A05
- Issued
- Aug 10, 1988
- Abate by
- Aug 29, 1988
- Penalty
- Initial $80 · Current $80
1910.213 C01
- Issued
- Aug 10, 1988
- Abate by
- Aug 29, 1988
- Penalty
- Initial $80 · Current $80
1910.213 P04
- Issued
- Aug 10, 1988
- Abate by
- Aug 29, 1988
- Penalty
- Initial $80 · Current $80
1910.219 C03
- Issued
- Aug 10, 1988
- Abate by
- Sep 14, 1988
- Penalty
- Initial $160 · Current $160
1910.252 A02 IIB
- Issued
- Aug 10, 1988
- Abate by
- Aug 22, 1988
- Penalty
- Initial $160 · Current $160
1910.252 A02 IVC
- Issued
- Aug 10, 1988
- Abate by
- Aug 22, 1988
1910.303 G02 I
- Issued
- Aug 10, 1988
- Abate by
- Aug 13, 1988
- Penalty
- Initial $80 · Current $80
1910.219 E03 I
- Issued
- Aug 10, 1988
- Abate by
- Sep 6, 1988
- Penalty
- Initial $480 · Current $480
1904.2 A
- Issued
- Aug 10, 1988
- Abate by
- Aug 22, 1988
1910.22 A02
- Issued
- Aug 10, 1988
- Abate by
- Aug 29, 1988
1910.22 D01
- Issued
- Aug 10, 1988
- Abate by
- Sep 14, 1988
1910.36 D01
- Issued
- Aug 10, 1988
- Abate by
- Aug 22, 1988
1910.37 Q05
- Issued
- Aug 10, 1988
- Abate by
- Aug 29, 1988
1910.101 B
- Issued
- Aug 10, 1988
- Abate by
- Aug 22, 1988
1910.108 G06 I
- Issued
- Aug 10, 1988
- Abate by
- Aug 16, 1988
1910.178 P01
- Issued
- Aug 10, 1988
- Abate by
- Aug 22, 1988
1910.215 A04
- Issued
- Aug 10, 1988
- Abate by
- Aug 22, 1988
1910.215 B09
- Issued
- Aug 10, 1988
- Abate by
- Aug 22, 1988
1910.303 F
- Issued
- Aug 10, 1988
- Abate by
- Aug 29, 1988
1910.303 G02 II
- Issued
- Aug 10, 1988
- Abate by
- Aug 22, 1988
1910.305 B02
- Issued
- Aug 10, 1988
- Abate by
- Aug 22, 1988
1910.1200 F04 II
- Issued
- Aug 10, 1988
- Abate by
- Aug 22, 1988
More inspections at Qualitex, INC.
View Qualitex, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in RI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 18260893.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.