Akron, OH ·
OSHA Inspection: KEN-TOOL MFG CO
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of KEN-TOOL MFG CO in 976 EVANS STREET, Akron, OH 44305 (NAICS 000000). OSHA activity number 214948358.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KEN-TOOL MFG CO
- Site address
- 976 EVANS STREET
- City
- Akron
- State
- OH
- ZIP
- 44305
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Union status
- Union (A)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3499
- Employees
- 14
- Industry flags
- Manufacturing safety.
Citations
18 citations on file for this inspection.
1904.2 A
- Issued
- Jan 23, 1976
- Abate by
- Feb 13, 1976
1904.5
- Issued
- Jan 23, 1976
- Abate by
- Feb 1, 1976
1910.25 C03 I
- Issued
- Jan 23, 1976
- Abate by
- Feb 27, 1976
1910.242 B
- Issued
- Jan 23, 1976
- Abate by
- Feb 27, 1976
1910.219 D01
- Issued
- Jan 23, 1976
- Abate by
- Mar 26, 1976
1910.219 F01
- Issued
- Jan 23, 1976
- Abate by
- Mar 26, 1976
1910.212 A01
- Issued
- Jan 23, 1976
- Abate by
- Feb 27, 1976
1910.219 C04
- Issued
- Jan 23, 1976
- Abate by
- Feb 27, 1976
1910.22 A02
- Issued
- Jan 23, 1976
- Abate by
- Feb 27, 1976
1910.252 E02 III
- Issued
- Jan 23, 1976
- Abate by
- Mar 19, 1976
- Penalty
- Initial $30 · Current $30
1910.157 A02
- Issued
- Jan 23, 1976
- Abate by
- Feb 13, 1976
1910.157 A06
- Issued
- Jan 23, 1976
- Abate by
- Feb 13, 1976
1910.106 E02 IVD
- Issued
- Jan 23, 1976
- Abate by
- Feb 27, 1976
1910.107 B05 IV
- Issued
- Jan 23, 1976
- Abate by
- Mar 19, 1976
- Penalty
- Initial $30 · Current $30
1910.107 G02
- Issued
- Jan 23, 1976
- Abate by
- Mar 26, 1976
- Penalty
- Initial $60 · Current $60
1910.106 E02 IV
- Issued
- Jan 23, 1976
- Abate by
- Jan 27, 1976
1910.107 G03
- Issued
- Jan 23, 1976
- Abate by
- Feb 13, 1976
1910.107 C02
- Issued
- Jan 23, 1976
- Abate by
- Jan 27, 1976
- Penalty
- Initial $30 · Current $30
More inspections at Ken-Tool MFG CO
View Ken-Tool MFG CO's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 214948358.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.