Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,192,068Inspections Most recent open 2026-08-04 Last loaded 2026-08-07

OSHA Inspection: CORRUGATED PARTITIONS, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CORRUGATED PARTITIONS, INC. in 296 CIRCLE FREEWAY DR., CINCINNATI, OH 45246 (NAICS 000000). OSHA activity number 2367183.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Corrugated Partitions, INC. for free Get an email when a new federal OSHA severe-injury report for Corrugated Partitions, INC. is published. One employer, no account, unsubscribe in one click.
Site address
296 CIRCLE FREEWAY DR.
City
CINCINNATI
State
OH
ZIP
45246
Mailing
296 CIRCLE FREEWAY DR., CINCINNATI, OH 45246
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Data loaded
NAICS code
000000
SIC code (legacy)
2653
Employees
40
Ownership type
A
Industry flags
Manufacturing safety.

15 citations on file for this inspection.

5(a)(1)

Serious 1 instance 20 exposed
Issued
Jan 6, 1986
Abate by
Jan 9, 1986
Penalty
Initial $560 · Current $300 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not furnish employment and a place of employment which were
free from recognized hazards that were causing or likely to cause death
or serious physical harm to employees in that employees were exposed to:
a) Employee(s) were exposed to the inadvertent activation of machines
that were not locked out during set-up operations and/or trouble-
shooting jams.
Essentials of an adequate lockout program would include the following:
ESSENTIALS OF A LOCKOUT PROGRAM
1) Before any maintenance, inspection, cleaning, adjusting or servicing
of equipment (electrical, mechanical or other) that requires entrance
into or close contact with the machinery or equipment, the main power
disconnect switch or valve, or both, controlling its source of power
or flow of materials, shall be lockout out or blocked off with
padlock, blank flange or similar device. Residual energy in equipment
having systems such as pneumatic, hydraulic, compressed springs or
other shall have these systems bled off, blocked or other effective
means implemented to ensure that all sources of energy have been
deactivated. Prior to any work commencing, however, it must be
verified that the equipment has been rendered safe (either by the
use of electrical test equipment or by attempting to activate the
equipment).
2) Locks keyed separately to ensure removal only by the authorized
person shall be provided to each person working in the areas
requiring a lockout. Where more than one person is involved in a
single operation, or where multiple operations (such as both
electrical and mechanical maintenance) are being simultaneously
performed on a single piece of equipment, locks shall be used by
each person.
3) A written lockout policy shall be established including procedures
for lockout out equipment or machinery. Employees involved in
implementing the program shall be trained in all elements thereof.
4) There shall be regular enforcement and periodic evaluation of the
program to ensure usage and adequacy of the program.
Recent events (2)
  • · I (S) $300.00
  • · Z (S) $560.00

1910.212 A01

Serious 3 instances 3 exposed
Issued
Dec 12, 1985
Abate by
Feb 15, 1986
Penalty
Initial $350 · Current $175 Reduced
Recent events (2)
  • · I (S) $175.00
  • · Z (S) $350.00

1910.219 E01 I

Serious 1 instance 10 exposed
Issued
Dec 12, 1985
Abate by
Jan 12, 1986
Penalty
Initial $280 · Current $140 Reduced
Recent events (2)
  • · I (S) $140.00
  • · Z (S) $280.00

1910.219 E03 I

Serious 2 instances 3 exposed
Issued
Dec 12, 1985
Abate by
Feb 15, 1986
Penalty
Initial $280 · Current $140 Reduced
Recent events (2)
  • · I (S) $140.00
  • · Z (S) $280.00

1910.303 B01

Serious 2 instances 80 exposed
Issued
Dec 12, 1985
Abate by
Feb 15, 1986
Penalty
Initial $560 · Current $280 Reduced
Recent events (2)
  • · I (S) $280.00
  • · Z (S) $560.00

1910.304 F04

Serious 1 instance 2 exposed
Issued
Dec 12, 1985
Abate by
Dec 15, 1985
Penalty
Initial $350 · Current $175 Reduced
Recent events (2)
  • · I (S) $175.00
  • · Z (S) $350.00

1910.304 F05 V

Serious 4 instances 1 exposed
Issued
Dec 12, 1985
Abate by
Dec 15, 1985
Penalty
Initial $490 · Current $245 Reduced
Recent events (2)
  • · I (S) $245.00
  • · Z (S) $490.00

1903.2 A01

Other-than-serious 1 instance 40 exposed
Issued
Dec 12, 1985
Abate by
Dec 16, 1985

1910.36 B08

Other-than-serious 1 instance 2 exposed
Issued
Dec 12, 1985
Abate by
Jan 12, 1986

1910.151 B

Other-than-serious 1 instance 40 exposed
Issued
Dec 12, 1985
Abate by
Feb 15, 1986
Recent events (2)
  • · I (O)
  • · Z (O)

1910.215 B09

Other-than-serious 1 instance 1 exposed
Issued
Dec 12, 1985
Abate by
Dec 16, 1985

1910.215 C06 I

Other-than-serious 1 instance 1 exposed
Issued
Dec 12, 1985
Abate by
Dec 16, 1985

1910.303 F

Other-than-serious 1 instance 6 exposed
Issued
Dec 12, 1985
Abate by
Dec 16, 1985

1910.303 G02 II

Other-than-serious 1 instance 2 exposed
Issued
Dec 12, 1985
Abate by
Dec 16, 1985

1910.304 A02

Other-than-serious 1 instance 2 exposed
Issued
Dec 12, 1985
Abate by
Dec 16, 1985

View Corrugated Partitions, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 2367183.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.