SPARTANBURG, SC —
OSHA Inspection: AME INDUSTRIAL CONTRACTORS, INC.
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of AME INDUSTRIAL CONTRACTORS, INC. in 151 A DAVIS CHAPEL RD, SPARTANBURG, SC 29307 (NAICS 238290). OSHA activity number 300270154.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AME INDUSTRIAL CONTRACTORS, INC.
- Site address
- 151 A DAVIS CHAPEL RD
- City
- SPARTANBURG
- State
- SC
- ZIP
- 29307
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 238290
- SIC code (legacy)
- 1796
- Employees
- 150
- Ownership type
- A
- Industry flags
- Construction safety.
Citations
3 citations on file for this inspection.
10012 A
- Issued
- Feb 3, 2003
- Abate by
- Feb 7, 2003
- Penalty
- Initial $1,375 · Current $550 Reduced
General-duty citation text
SCRR 71-112A: Failed to furnish a place of employment which is free of recognized hazards which may cause death or serious physical harm to his employees and comply with this regulation and other occupational safety and health rules and regulations promulgated under Chapter 15 of Title 41, Code of Laws, State of South Carolina, 1976, as amended, as follows: A. On December 12, 2002 employer knew or should have known that two supervisors and two workers were exposed to the hazards of being struck by falling equipment while moving an unstable load with a Taylor forklift, Equipment Number SDG-21406, onto a moving Talbert flat bed trailer in the parking lot of Steel Parts, Inc. A feasible and useful method to correct this hazard, among other methods, is to only move stable and safely arranged loads with the forklift and to keep all employees out of harm's way.
Recent events (2)
- — I (S) $550.00
- — Z (S) $1375.00
10012 A
- Issued
- Feb 3, 2003
- Abate by
- Feb 7, 2003
- Penalty
- Initial $1,375 · Current $550 Reduced
General-duty citation text
SCRR 71-112A: Failed to furnish a place of employment which is free of recognized hazards which may cause death or serious physical harm to his employees and comply with this regulation and other occupational safety and health rules and regulations promulgated under Chapter 15 of Title 41, Code of Laws, State of South Carolina, 1976, as amended, as follows: A. On December 12, 2002 employer knew or should have known that two supervisors and two workers were exposed to the hazards of being struck by falling machinery while moving a load with a forklift without having it properly secured or chained to the lift. A feasible and useful method is to only move loads that have been chained or otherwise secured to the forklift.
Recent events (2)
- — I (S) $550.00
- — Z (S) $1375.00
10012 A
- Issued
- Feb 3, 2003
- Abate by
- Feb 7, 2003
- Penalty
- Initial $1,375 · Current $550 Reduced
General-duty citation text
SCRR 71-112A: Failed to furnish a place of employment which is free of recognized hazards which may cause death or serious physical harm to his employees and comply with this regulation and other occupational safety and health rules and regulations promulgated under Chapter 15 of Title 41, Code of Laws, State of South Carolina, 1976, as amended, as follows: A. On December 12, 2002 employer knew or should have known that two supervisors and two workers were exposed to the hazards of being struck by machinery or truck while loading a trailer while it was being moved, the brakes were not set and the wheels were not blocked. A feasible and useful method to correct this hazard, among other methods, is to always have the brakes set, the wheel blocked and to never allow a driver to move the vehicle while it is being loaded with workers standing in harm's way.
Recent events (2)
- — I (S) $550.00
- — Z (S) $1375.00
More inspections in this industry (NAICS 238290)
More inspections in SC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 300270154.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.