MIAMI, FL —
OSHA Inspection: SUPERIOR TRUSS SYSTEMS INCORPORATED
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SUPERIOR TRUSS SYSTEMS INCORPORATED in 8500 NW 58TH STREET, MIAMI, FL 33166 (NAICS 000000). OSHA activity number 300499746.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SUPERIOR TRUSS SYSTEMS INCORPORATED
- Site address
- 8500 NW 58TH STREET
- City
- MIAMI
- State
- FL
- ZIP
- 33166
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2439
- Employees
- 70
- Ownership type
- A
Citations
13 citations on file for this inspection.
5(a)(1)
- Issued
- Nov 1, 1998
- Abate by
- Nov 20, 1998
- Penalty
- Initial $1,250 · Current $625 Reduced
General-duty citation text
Section 5(A)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish to employees employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to crushing injuries resulting from forklift truck tip over accidents: (a) On or about September 9, 1998, the employer did not enforce the use of seat belts which were provided on a 60 Caterpillar forklift. (b) On or about September 9, 1998, the employer had not provided seatbelts on a Model DF8 Nasco Loader forklift. Among other methods, one feasible and acceptable abatement method would be to provide seatbelts and require fork truck operators to use seat belts in accordance with ASME/ANSI B56.1a-1989 Addenda to ASME/ANSI B56.1-1988 and ASME/ANSI B56.1-1993. PLEASE NOTE: CERTIFICATION AND DOCUMENTATION OF ABATEMENT IS REQUIRED FOR THIS VIOLATION.
Recent events (2)
- — I (S) $625.00
- — Z (S) $1250.00
1910.22 A01
- Issued
- Nov 1, 1998
- Abate by
- Nov 9, 1998
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1910.178 Q07
- Issued
- Nov 1, 1998
- Abate by
- Nov 20, 1998
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1000.00
1910.213 B03
- Issued
- Nov 1, 1998
- Abate by
- Nov 20, 1998
- Penalty
- Initial $1,250 · Current $625 Reduced
Recent events (2)
- — I (S) $625.00
- — Z (S) $1250.00
1910.213 H01
- Issued
- Nov 1, 1998
- Abate by
- Nov 20, 1998
Recent events (2)
- — I (S)
- — Z (S)
1910.213 H04
- Issued
- Nov 1, 1998
- Abate by
- Nov 20, 1998
Recent events (2)
- — I (S)
- — Z (S)
1910.213 R04
- Issued
- Nov 1, 1998
- Abate by
- Dec 24, 1998
- Penalty
- Initial $2,500 · Current $1,250 Reduced
Recent events (2)
- — I (S) $1250.00
- — Z (S) $2500.00
1910.303 F
- Issued
- Nov 1, 1998
- Abate by
- Nov 20, 1998
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1000.00
1910.305 B01
- Issued
- Nov 1, 1998
- Abate by
- Nov 6, 1998
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1000.00
1910.305 B02
- Issued
- Nov 1, 1998
- Abate by
- Nov 13, 1998
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1000.00
1910.305 G01 III
- Issued
- Nov 1, 1998
- Abate by
- Nov 13, 1998
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1000.00
1910.334 A01
- Issued
- Nov 1, 1998
- Abate by
- Nov 6, 1998
- Penalty
- Initial $1,000
Recent events (2)
- — I (O)
- — Z (S) $1000.00
1910.144 A01 II
- Issued
- Nov 1, 1998
- Abate by
- Nov 6, 1998
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Superior Truss Systems Incorporated
View Superior Truss Systems Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 300499746.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.