BYESVILLE, OH —
OSHA Inspection: FAMOUS INDUSTRIES, INC. DBA METAL STAMPING
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FAMOUS INDUSTRIES, INC. DBA METAL STAMPING in 356 WEST MAIN STREET, BYESVILLE, OH 43723 (NAICS 000000). OSHA activity number 300535648.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FAMOUS INDUSTRIES, INC. DBA METAL STAMPING
- Site address
- 356 WEST MAIN STREET
- City
- BYESVILLE
- State
- OH
- ZIP
- 43723
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3444
- Employees
- 75
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
19 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 2, 1999
- Abate by
- Aug 4, 1999
- Penalty
- Initial $1,125 · Current $675 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a.The employer did not inspect the critical components of a hoist such as hooks, controls, limit stops, chains, suspension members, brakes, load and idler sprockets and supporting structure or trolley which collectively lift loads. Among other methods, a feasible and acceptable abatement method to correct this hazard is to comply with the safe operating procedures and inspection requirements recommended by the manufacturer and the ASME/ANSI B30.16 such as, but not limited to: The company can use the ASME/ANSI the American Society of Mechanical Engineers/ American National Standards Institute ASME B30.16-1993 (Overhead Hoist (Underhung)), but will have to assure that a qualified person perform the inspections, maintains the upkeep of hoists; and trains the operators to perform daily service checks. Or contact a local crane/hoist company to perform inspections and maintain proper upkeep
Recent events (2)
- — I (S) $675.00
- — Z (S) $1125.00
1910.23 D01 III
- Issued
- Jul 2, 1999
- Abate by
- Jul 8, 1999
- Penalty
- Initial $1,875 · Current $1,125 Reduced
Recent events (2)
- — I (S) $1125.00
- — Z (S) $1875.00
1910.132 D01
- Issued
- Jul 2, 1999
- Abate by
- Aug 4, 1999
- Penalty
- Initial $1,125 · Current $675 Reduced
Recent events (2)
- — I (S) $675.00
- — Z (S) $1125.00
1910.147 C04 II
- Issued
- Jul 2, 1999
- Abate by
- Oct 31, 1999
- Penalty
- Initial $1,875 · Current $1,125 Reduced
Recent events (2)
- — I (S) $1125.00
- — Z (S) $1875.00
1910.147 C05 II
- Issued
- Jul 2, 1999
- Abate by
- Jul 8, 1999
Recent events (2)
- — I (S)
- — Z (S)
1910.303 F
- Issued
- Jul 2, 1999
- Abate by
- Aug 4, 1999
Recent events (2)
- — I (S)
- — Z (S)
1910.215 A02
- Issued
- Jul 2, 1999
- Abate by
- Jul 8, 1999
- Penalty
- Initial $1,125 · Current $675 Reduced
Recent events (2)
- — I (S) $675.00
- — Z (S) $1125.00
1910.215 B09
- Issued
- Jul 2, 1999
- Abate by
- Jul 8, 1999
Recent events (2)
- — I (S)
- — Z (S)
1910.217 B03 I
- Issued
- Jul 2, 1999
- Abate by
- Jul 8, 1999
- Penalty
- Initial $1,875 · Current $675 Reduced
Recent events (2)
- — I (S) $675.00
- — Z (S) $1875.00
1910.217 B03 II
- Issued
- Jul 2, 1999
- Abate by
- Jul 8, 1999
Recent events (2)
- — I (S)
- — Z (S)
1910.217 B04 I
- Issued
- Jul 2, 1999
- Abate by
- Jul 8, 1999
- Penalty
- Initial $1,875
Recent events (2)
- — I (O)
- — Z (S) $1875.00
1910.217 B07 II
- Issued
- Jul 2, 1999
- Abate by
- Jul 8, 1999
- Penalty
- Initial $1,125 · Current $675 Reduced
Recent events (2)
- — I (S) $675.00
- — Z (S) $1125.00
1910.217 B08 III
- Issued
- Jul 2, 1999
- Abate by
- Jul 8, 1999
- Penalty
- Initial $1,500 · Current $900 Reduced
Recent events (2)
- — I (S) $900.00
- — Z (S) $1500.00
1910.217 B09 V
- Issued
- Jul 2, 1999
- Abate by
- Jul 12, 1999
- Penalty
- Initial $1,300 · Current $780 Reduced
Recent events (2)
- — I (S) $780.00
- — Z (S) $1300.00
1910.217 C03 VII
- Issued
- Jul 2, 1999
- Abate by
- Jul 12, 1999
- Penalty
- Initial $4,500 · Current $3,150 Reduced
Recent events (2)
- — I (S) $3150.00
- — Z (S) $4500.00
1910.217 D01 II
- Issued
- Jul 2, 1999
- Abate by
- Jul 12, 1999
Recent events (2)
- — I (S)
- — Z (S)
1910.217 E01 I
- Issued
- Jul 2, 1999
- Abate by
- Aug 4, 1999
- Penalty
- Initial $1,125 · Current $675 Reduced
Recent events (2)
- — I (S) $675.00
- — Z (S) $1125.00
1910.217 E01 II
- Issued
- Jul 2, 1999
- Abate by
- Aug 4, 1999
Recent events (2)
- — I (S)
- — Z (S)
1910.242 B
- Issued
- Jul 2, 1999
- Abate by
- Jul 8, 1999
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Famous Industries, INC. DBA Metal Stamping
View Famous Industries, INC. DBA Metal Stamping's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 300535648.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.