Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: GENERAL FEDERAL CONSTRUCTION, INC.

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of GENERAL FEDERAL CONSTRUCTION, INC. in 360 22ND ST., LOMBARD, IL 60148 (NAICS 000000). OSHA activity number 300592144.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch General Federal Construction, INC. for free Get an email when a new federal OSHA severe-injury report for General Federal Construction, INC. is published. One employer, no account, unsubscribe in one click.
Site address
360 22ND ST.
City
LOMBARD
State
IL
ZIP
60148
Mailing
134 W. LAKE ST., ADDISON, IL 60101
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Union (Y)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
000000
SIC code (legacy)
1741
Employees
5
Ownership type
Private (A)

10 citations on file for this inspection.

5(a)(1)

Serious Gravity 01 1 instance 2 exposed
Issued
Apr 28, 1999
Abate by
May 3, 1999
Penalty
Initial $600 · Current $600
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
provide a workplace which was free from recognized hazards that are likely
cause death or
serious harm to employees.  Employees were exposed to the hazards of
falling loads by a mortar
tub being traveled improperly by a rough terrain forklift.
A rough terrain forklift at the Lombard jobsite was traveling with a
mortar tub placed
at the end of the forks and not tilted back.
A feasible means of abatement would be following the guidelines set forth
in the
American Society of Mechanical Engineers, ASME B56.6a-1994, Safety
Standard for
Rough Terrain Forklift Trucks.
NO CERTIFICATION REQUIRED FOR THIS ITEM.

1926.20 B02

Serious Gravity 01 1 instance 2 exposed
Issued
Apr 28, 1999
Abate by
Jun 1, 1999
Penalty
Initial $600 · Current $600

1926.56 A

Serious Gravity 02 1 instance 2 exposed
Issued
Apr 28, 1999
Abate by
May 3, 1999
Penalty
Initial $800 · Current $800

1926.250 B01

Serious Gravity 03 4 instances 2 exposed
Issued
Apr 28, 1999
Abate by
May 6, 1999
Penalty
Initial $1,000 · Current $1,000

1926.501 B03

Serious Gravity 03 1 instance 2 exposed
Issued
Apr 28, 1999
Abate by
May 3, 1999
Penalty
Initial $1,000 · Current $1,000

1926.501 B04 I

Serious Gravity 02 1 instance 2 exposed
Issued
Apr 28, 1999
Abate by
May 6, 1999
Penalty
Initial $800 · Current $800

1926.502 I03

Serious Gravity 02 1 instance 2 exposed
Issued
Apr 28, 1999
Abate by
May 6, 1999
Penalty
Initial $800 · Current $800

5(a)(1)

Serious Gravity 10 1 instance 5 exposed
Issued
Apr 21, 1999
Abate by
Apr 29, 1999
Penalty
Initial $2,000 · Current $2,000
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The
employer did not furnish
a place of employment which was free from recognized hazards that are
likely to cause death
or serious harm to employees.  Employees were exposed to the hazards of
falls while riding
up/down in a scissor lift at the Lombard job site.
10-40 feet above grade - Employees using a scissor lift at the Lombard
jobsite were
exposed to fall hazards.  The end and sides of the lift used to
access/egress the lift did
not have fall protection, the guardrails system was not utilized.
A feasible means of abatement would be to provide fall protection in
accordance with the
American National Standards Institute, ANSI A92.6-1979 Standard for
Self-Propelled
Elevating Work Platforms.
DOCUMENTATION AND CERTIFICATION REQUIRED FOR THIS ITEM.

5(a)(1)

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 21, 1999
Abate by
Apr 29, 1999
Penalty
Initial $2,000 · Current $2,000
29 CFR Section 5(a)(1) of the Occupational Safety and Health Act of 1970:
The employer did
not furnish a workplace of employment which was free of recognized hazards
that were likely
to cause death or serious physical harm to employees.
Employees working above grade level in a six level building were not
provided stairs to
access/egress the building in case of emergency.
A feasible means of abatement would be to provide stairs in accordance
with the National
Fire Code, NFC 241, Standard for Safe Guarding Construction, Alteration,
and
Demolition Operations.
DOCUMENTATION AND CERTIFICATION REQUIRED FOR THIS ITEM.

1926.501 B01

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 21, 1999
Abate by
Apr 29, 1999
Penalty
Initial $2,000 · Current $2,000

View General Federal Construction, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 300592144.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.