MANCHESTER, NY ·
OSHA Inspection: LEXINGTON DIE CASTING
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of LEXINGTON DIE CASTING in 58 NORTH AVE., MANCHESTER, NY 14504 (NAICS 000000). OSHA activity number 300626306.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LEXINGTON DIE CASTING
- Site address
- 58 NORTH AVE.
- City
- MANCHESTER
- State
- NY
- ZIP
- 14504
- Mailing
- 58 NORTH AVE., MANCHESTER, NY 00000
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3363
- Employees
- 23
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
16 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 20, 1997
- Abate by
- Jan 12, 1998
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to THE HAZARD OF BEING STRUCK BY THE LOAD SHOULD THE LOAD SLIP OFF THE HOOK, OR THE LIFTING DEVICE FAILS: a)Production Area, on or about 6/19/97: An overhead electric chain hoist used in conjunction with the Zinc Oven and two other overhead electric chain hoists used in the main production area, and one overhead electric chain hoist located in the machine shop area were being used to move molten metal, molds and press pieces. All of the hoists had the hook throat latches missing from the load hook. ABATEMENT NOTES: Among other methods one feasible and acceptable method to correct this hazard is to: 1.Install and/or repair hook throat latches. 2.Follow the requirements of the American National Standard for electric chain hoists (ANSI/ASME HST-1M-1989) b)Production Area, on or about 6/19/97: The below-the-hook lifting devices used to suspend a kettle of molten metal were not inspected and tested for load capacities. ABATEMENT NOTES: Among other methods, one feasible and acceptable method to correct this hazard is to: 1.Conduct initial, frequent, and periodical inspections of the lifting devices by designated personnel for wear, deterioration or malfunction per ASME B30.20-1993. Abatement documentation must be submitted for this Citation.
Recent events (2)
- · I (S) $1200.00
- · Z (S) $2000.00
1910.22 C
- Issued
- Oct 20, 1997
- Abate by
- Dec 5, 1997
- Penalty
- Initial $600 · Current $390 Reduced
Recent events (2)
- · I (S) $390.00
- · Z (S) $600.00
1910.23 C03
- Issued
- Oct 20, 1997
- Abate by
- Nov 7, 1997
- Penalty
- Initial $1,000 · Current $604 Reduced
Recent events (2)
- · I (S) $604.00
- · Z (S) $1000.00
1910.101 B
- Issued
- Oct 20, 1997
- Abate by
- Oct 23, 1997
- Penalty
- Initial $600 · Current $390 Reduced
Recent events (2)
- · I (S) $390.00
- · Z (S) $600.00
1910.133 A01
- Issued
- Oct 20, 1997
- Abate by
- Dec 5, 1997
- Penalty
- Initial $2,000 · Current $604 Reduced
Recent events (2)
- · I (S) $604.00
- · Z (S) $2000.00
1910.136 A
- Issued
- Oct 20, 1997
- Abate by
- Nov 22, 1997
- Penalty
- Initial $800 · Current $520 Reduced
Recent events (2)
- · I (S) $520.00
- · Z (S) $800.00
1910.151 C
- Issued
- Oct 20, 1997
- Abate by
- Nov 7, 1997
- Penalty
- Initial $1,000 · Current $604 Reduced
Recent events (2)
- · I (S) $604.00
- · Z (S) $1000.00
1910.157 G04
- Issued
- Oct 20, 1997
- Abate by
- Nov 22, 1997
- Penalty
- Initial $1,000 · Current $604 Reduced
Recent events (2)
- · I (S) $604.00
- · Z (S) $1000.00
1910.178 K01
- Issued
- Oct 20, 1997
- Abate by
- Oct 23, 1997
- Penalty
- Initial $600 · Current $390 Reduced
Recent events (2)
- · I (S) $390.00
- · Z (S) $600.00
1910.212 A01
- Issued
- Oct 20, 1997
- Abate by
- Dec 5, 1997
- Penalty
- Initial $2,000 · Current $1,200 Reduced
Recent events (2)
- · I (S) $1200.00
- · Z (S) $2000.00
1910.254 D09 III
- Issued
- Oct 20, 1997
- Abate by
- Nov 12, 1997
- Penalty
- Initial $1,000 · Current $604 Reduced
Recent events (2)
- · I (S) $604.00
- · Z (S) $1000.00
1910.304 F05 V
- Issued
- Oct 20, 1997
- Abate by
- Oct 23, 1997
- Penalty
- Initial $600 · Current $390 Reduced
Recent events (2)
- · I (S) $390.00
- · Z (S) $600.00
1910.132 D01 I
- Issued
- Oct 20, 1997
- Abate by
- Nov 22, 1997
Recent events (2)
- · I (O)
- · Z (O)
1910.132 D02
- Issued
- Oct 20, 1997
- Abate by
- Dec 5, 1997
Recent events (2)
- · I (O)
- · Z (O)
1910.147 C06 I
- Issued
- Oct 20, 1997
- Abate by
- Nov 22, 1997
Recent events (2)
- · I (O)
- · Z (O)
1910.305 B01
- Issued
- Oct 20, 1997
- Abate by
- Nov 7, 1997
Recent events (2)
- · I (O)
- · Z (O)
More inspections in this industry (NAICS 000000)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 300626306.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.