ARECIBO, PR —
OSHA Inspection: CUTLER HAMMER ELECTRICAL
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CUTLER HAMMER ELECTRICAL in CARR 2 KM 67.6 BO SANTANA ZONA INDUSTRIAL, ARECIBO, PR 00612 (NAICS 000000). OSHA activity number 300918786.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CUTLER HAMMER ELECTRICAL
- Site address
- CARR 2 KM 67.6 BO SANTANA ZONA INDUSTRIAL
- City
- ARECIBO
- State
- PR
- ZIP
- 00612
- Mailing
- PO BOX 709, ARECIBO, PR 00613
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3613
- Employees
- 413
- Ownership type
- A
Citations
9 citations on file for this inspection.
6A0001
- Issued
- Jan 26, 1999
- Abate by
- Feb 1, 1999
- Penalty
- Initial $1,500 · Current $1,125 Reduced
General-duty citation text
Section 6(a) of the Puerto Rico Occupational Safety and Health Act: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or physical harm to employees in that employees were exposed to: Seccion 6(a) de la Ley de Seguridad y Salud en el Trabajo de Puerto Rico: El patrono no proveyo empleo y un sitio de empleo libre de riesgos reconocidos que esten causando o que puedan causar muerte o dano fisico a los empleados, por cuanto empleados estaban expuestos a: a)An employee was found working over machinery ( Hydraulic Press without manufacture description plate found to be reconstructed by Deutsche, 150 ton.-hydraulic Circuit, dwg. no. 86-1029-D-VP, as a mechanic the press no. 19) 8 feet above adjacent floor to change a defective hose from the hydraulic system without personal fall arrest system. The employee had to stand over the equipment due to the place of the breakage and since he reach the height by a mobile scaffold jumping out of it, walk over the components of the press reaching the place of the breakage and started working in the repair. Employee exposed to fractures and other similar injuries due to falls. Among other methods one feasible is to implant the use of a personal fall arrest system. a)Un empleado fue encontrado trabajando sobre maquinaria (Prensa Hidraulica sin la placa descriptiva del manufacturero reconstruida por Deutsche, 150 ton.-Circuito Hidraulico, dibujo no. 86-1029-D-VP, segun el mecanico la prensa no. 19) 8 pies sobre piso adyacente para reemplazar una manga del sistema hidraulico sin equipo de proteccion personal contra caidas. El empleado tuvo que subirse sobre el equipo debido al lugar de la rotura y ya que alcanzo la altura con un equipo de andamio movible bajandose de este, caminando sobre los componentes de la prensa hasta alcanzar el lugar de la rotura y comenzar a trabajar en la reparacion. Empleados expuestos a fracturas y otras lesiones similares por caidas. Ademas de otros metodos, uno factible lo es el implantar el uso de sistema de proteccion de arresto personal.n
Recent events (2)
- — I (S) $1125.00
- — Z (S) $1500.00
1910.212 A03 II
- Issued
- Jan 26, 1999
- Abate by
- Feb 5, 1999
- Penalty
- Initial $5,000 · Current $3,750 Reduced
Recent events (2)
- — I (S) $3750.00
- — Z (S) $5000.00
1910.132 A
- Issued
- Jan 26, 1999
- Abate by
- Feb 5, 1999
- Penalty
- Initial $1,500 · Current $1,125 Reduced
Recent events (2)
- — I (S) $1125.00
- — Z (S) $1500.00
1910.132 D01
- Issued
- Jan 26, 1999
- Abate by
- Feb 22, 1999
- Penalty
- Initial $5,000
Recent events (2)
- — I (S)
- — Z (S) $5000.00
1910.133 A01
- Issued
- Jan 26, 1999
- Abate by
- Feb 5, 1999
- Penalty
- Initial $2,000 · Current $1,500 Reduced
Recent events (2)
- — I (S) $1500.00
- — Z (S) $2000.00
1910.136 A
- Issued
- Jan 26, 1999
- Abate by
- Feb 5, 1999
- Penalty
- Initial $1,500
Recent events (2)
- — I (S)
- — Z (S) $1500.00
1910.305 B01
- Issued
- Jan 26, 1999
- Abate by
- Jan 29, 1999
- Penalty
- Initial $2,000 · Current $1,500 Reduced
Recent events (2)
- — I (S) $1500.00
- — Z (S) $2000.00
1910.305 G01 III
- Issued
- Jan 26, 1999
- Abate by
- Feb 1, 1999
- Penalty
- Initial $2,000 · Current $1,500 Reduced
Recent events (2)
- — I (S) $1500.00
- — Z (S) $2000.00
1910.23 A08
- Issued
- Jan 26, 1999
- Abate by
- Feb 5, 1999
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Cutler Hammer Electrical
View Cutler Hammer Electrical's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in PR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 300918786.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.