Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,198,201Inspections Most recent open 2026-08-31 Last loaded 2026-09-03

OSHA Inspection: MANSFIELD ROOFING & SHEET METAL, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MANSFIELD ROOFING & SHEET METAL, INC. in 7000 WASHINGTON STREET, GURNEE, IL 60031 (NAICS 000000). OSHA activity number 300951092.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Mansfield Roofing & Sheet Metal, INC. for free Get an email when a new federal OSHA severe-injury report for Mansfield Roofing & Sheet Metal, INC. is published. One employer, no account, unsubscribe in one click.
Site address
7000 WASHINGTON STREET
City
GURNEE
State
IL
ZIP
60031
Mailing
8100 W. 47TH STREET, LYONS, IL 60534
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Union (Y)
Opened
Closing conference
Case closed
Data loaded
NAICS code
000000
SIC code (legacy)
1761
Employees
16
Ownership type
Private (A)
Industry flags
Construction safety.

5 citations on file for this inspection.

5(a)(1)

Serious Gravity 03 1 instance 2 exposed
Issued
Oct 16, 1997
Abate by
Oct 21, 1997
Penalty
Initial $1,125 · Current $600 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to:
(a)  Northeast End of the Building - On or about June 11, 1997, two
employees were exposed
to the hazard of falling approximately 23 feet while climbing above the
guardrail system to stand
on two wooden planks and a scaffold platform to gain access to the roof
while on a Marklift self
propelled elevating work platform (scissor lift).
Among other methods, one feasible and useful method to correct this hazard
is to develop,
implement, and enforce a work rule such as stipulated in American National
Standards Institute
A92.6 "American National Standard For Self Propelled Elevating Work
Platforms" 1990
Personnel shall maintain a firm footing on the platform while working
thereon.  Use of planks,
ladders, or any other device on the aerial platform for achieving
additional height or reach shall
prohibited.
No abatement certification or documentation is required for this item.
Recent events (2)
  • · I (S) $600.00
  • · Z (S) $1125.00

1926.20 B01

Serious Gravity 01 2 instances 18 exposed
Issued
Oct 16, 1997
Abate by
Oct 24, 1997
Penalty
Initial $573 · Current $250 Reduced
Recent events (2)
  • · I (S) $250.00
  • · Z (S) $573.00

1926.20 B02

Serious Gravity 01 1 instance 2 exposed
Issued
Oct 16, 1997
Abate by
Oct 22, 1997

1926.501 B10

Serious Gravity 10 1 instance 2 exposed
Issued
Oct 16, 1997
Abate by
Oct 21, 1997
Penalty
Initial $3,000 · Current $1,500 Reduced
Recent events (2)
  • · I (S) $1500.00
  • · Z (S) $3000.00

1926.503 B01

Other-than-serious Gravity 01 1 instance 18 exposed
Issued
Oct 16, 1997
Abate by
Oct 22, 1997

View Mansfield Roofing & Sheet Metal, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 300951092.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.