LIMA, NY —
OSHA Inspection: INDUSTRIAL CERAMICS INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of INDUSTRIAL CERAMICS INC. in 7574 E. MAIN STREET, LIMA, NY 14485 (NAICS 000000). OSHA activity number 301002663.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INDUSTRIAL CERAMICS INC.
- Site address
- 7574 E. MAIN STREET
- City
- LIMA
- State
- NY
- ZIP
- 14485
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3264
- Employees
- 136
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
19 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 11, 1998
- Abate by
- Sep 13, 1998
- Penalty
- Initial $1,400 · Current $1,400
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a fall hazard: On or about 06/19/98. a) East of Harrop tunnel kiln. The working platform attached to the forks of the Yale #4 fork lift was not secured. Employee(s) engaged in the repair of a 220/240 electric bus bar approximately seven (7) feet above ground was exposed to the hazard of falling to the ground below. AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE METHOD TO CORRECT THIS HAZARD IS TO: 1)Secure the platform to the fork lift forks as required in An American National Standard, Powered and Nonpowered Industrial Trucks, "Safety Standard for Low Lift and High Lift Trucks," ASME B56.1-1993, Section 4.17.3(b). 2)Train the employees in the proper use of fork lifts when lifting employees as required in An American National Standard, Powered and Nonpowered Industrial Trucks, "Safety Standard for Low Lift and High Lift Trucks," ASME B56.1-1993, Section 4.19. ABATEMENT NOTE: THIS VIOLATION REQUIRES ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION.
1910.22 A01
- Issued
- Aug 11, 1998
- Abate by
- Aug 15, 1998
- Penalty
- Initial $1,050 · Current $1,050
1910.22 C
- Issued
- Aug 11, 1998
- Abate by
- Aug 17, 1998
- Penalty
- Initial $1,400 · Current $1,400
1910.23 C01
- Issued
- Aug 11, 1998
- Abate by
- Sep 13, 1998
- Penalty
- Initial $1,400 · Current $1,400
1910.25 D02 XII
- Issued
- Aug 11, 1998
- Abate by
- Aug 15, 1998
- Penalty
- Initial $1,400 · Current $1,400
1910.37 Q05
- Issued
- Aug 11, 1998
- Abate by
- Aug 15, 1998
- Penalty
- Initial $1,050 · Current $1,050
1910.101 B
- Issued
- Aug 11, 1998
- Abate by
- Aug 15, 1998
- Penalty
- Initial $1,400 · Current $1,400
1910.253 B04 III
- Issued
- Aug 11, 1998
- Abate by
- Aug 15, 1998
1910.106 E06 I
- Issued
- Aug 11, 1998
- Abate by
- Aug 16, 1998
- Penalty
- Initial $1,400 · Current $1,400
1910.106 E06 II
- Issued
- Aug 11, 1998
- Abate by
- Aug 16, 1998
1910.110 F04 I
- Issued
- Aug 11, 1998
- Abate by
- Aug 15, 1998
- Penalty
- Initial $1,400 · Current $1,400
1910.157 C01
- Issued
- Aug 11, 1998
- Abate by
- Aug 15, 1998
- Penalty
- Initial $1,050 · Current $1,050
1910.157 G02
- Issued
- Aug 11, 1998
- Abate by
- Sep 13, 1998
1910.219 D01
- Issued
- Aug 11, 1998
- Abate by
- Aug 16, 1998
- Penalty
- Initial $1,400 · Current $1,400
1910.219 E01 I
- Issued
- Aug 11, 1998
- Abate by
- Aug 16, 1998
1910.242 B
- Issued
- Aug 11, 1998
- Abate by
- May 29, 1998
- Penalty
- Initial $893 · Current $893
1910.303 B01
- Issued
- Aug 11, 1998
- Abate by
- Aug 16, 1998
- Penalty
- Initial $1,050 · Current $1,050
1910.305 G02 III
- Issued
- Aug 11, 1998
- Abate by
- Aug 14, 1998
1910.334 A02 II
- Issued
- Aug 11, 1998
- Abate by
- Aug 15, 1998
More inspections at Industrial Ceramics INC.
View Industrial Ceramics INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 301002663.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.