PASCAGOULA, MS —
OSHA Inspection: HAM MARINE, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of HAM MARINE, INC. in 3500 PORT AUTHORITY ROAD, PASCAGOULA, MS 39567 (NAICS 000000). OSHA activity number 301032124.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HAM MARINE, INC.
- Site address
- 3500 PORT AUTHORITY ROAD
- City
- PASCAGOULA
- State
- MS
- ZIP
- 39567
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3731
- Employees
- 1000
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
7 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 29, 1997
- Abate by
- Sep 24, 1997
- Penalty
- Initial $4,500 · Current $3,000 Reduced
General-duty citation text
Section 5(a)(1) of Public Law 91-596, the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to: Hazard of falls. . The following defects were observed on scaffold system: (a) The scaffolding clamps were not designed by a qualified person. (b) After fabrication and prior to the use, no testing of scaffolding clamps took place. (c) The scaffolding system as used on site was not designed by a qualified person. (d) Information relative to the maximum loads which could be placed on the scaffold or its components was not provided by the erector to the user. (e) Inspections of the scaffold by a competent person to determine if overloading had or was taking place, were not conducted on a regular or periodic basis. (f) Employees working on the scaffold were not trained to recognize when the maximum intended loads have been achieved and the load carrying capacities of the scaffold. (g) Because of the size of the scaffold system, its height above the water and the fact it was not suspended or supported but attached to the drilling platform by field engineered clamps, the scaffold system should have been certified by a qualified professional engineer. One feasible and acceptable method to abate this condition would be to have the scaffold and its components designed and tested by a qualified engineer with a written report available for review by the Occupational Safety and Health Administration. Xr y y &
Recent events (2)
- — I (S) $3000.00
- — Z (S) $4500.00
1910.180 B02
- Issued
- Aug 29, 1997
- Abate by
- Sep 17, 1997
- Penalty
- Initial $1,800 · Current $1,800
Recent events (2)
- — I (S) $1800.00
- — Z (S) $1800.00
1915.12 E01 III
- Issued
- Aug 29, 1997
- Abate by
- Oct 16, 1997
- Penalty
- Initial $2,250 · Current $1,700 Reduced
Recent events (2)
- — I (S) $1700.00
- — Z (S) $2250.00
1915.71 B05
- Issued
- Aug 29, 1997
- Abate by
- Sep 17, 1997
- Penalty
- Initial $4,500 · Current $4,500
Recent events (2)
- — I (S) $4500.00
- — Z (S) $4500.00
1915.71 B07
- Issued
- Aug 29, 1997
- Abate by
- Sep 17, 1997
- Penalty
- Initial $4,500 · Current $4,500
Recent events (2)
- — I (S) $4500.00
- — Z (S) $4500.00
1915.91 A
- Issued
- Aug 29, 1997
- Abate by
- Sep 17, 1997
- Penalty
- Initial $1,800 · Current $1,400 Reduced
Recent events (2)
- — I (S) $1400.00
- — Z (S) $1800.00
1915.181 D
- Issued
- Aug 29, 1997
- Abate by
- Sep 17, 1997
- Penalty
- Initial $3,150 · Current $2,000 Reduced
Recent events (2)
- — I (S) $2000.00
- — Z (S) $3150.00
More inspections at HAM Marine, INC.
View HAM Marine, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 301032124.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.