HOUSTON, TX —
OSHA Inspection: SCHUMACHER COMPANY INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of SCHUMACHER COMPANY INC. in 5610 POLK STREET, HOUSTON, TX 77023 (NAICS 000000). OSHA activity number 301407334.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SCHUMACHER COMPANY INC.
- Site address
- 5610 POLK STREET
- City
- HOUSTON
- State
- TX
- ZIP
- 77023
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3471
- Employees
- 60
- Ownership type
- A
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 10, 2000
- Abate by
- Oct 20, 2000
- Penalty
- Initial $675 · Current $405 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to splash hazards and struck-by hazards from falling portions of the hoisted load due to the lack of latches and inoperable latches on the hooks holding the hoisted load located on the Line B Chrome Line 10 ton floor-operated crane, the maintenance area 2 ton floor-operated crane, the Yale 5 ton floor-operated crane in the shipping and receiving area, the 20 ton floor-operated crane on the Line C Chrome Line, the 2 ton floor operated crane on the Line A Chrome Line, and the 10 ton floor-operated crane on the Nickel Electroless Line: Among other methods, one feasible and acceptable method for abatement is to ensure that latch type hooks are used unless the use of the latch increases the hazard, and that periodic inspections of the hook retaining nuts or collars and pins, welds or riveting used to secure the retaining member are performed to detect and correct deformations, in accordance with Sections 16- 1.1.2.4.d. and 16-1.2.1.3.c. of the American National Standards Institute (ANSI) B30.16-1973 Safety Standards for Cranes, Derricks, Hoists, Hooks, Jacks, and Slings. Disclaimers: 1. You are not limited to the abatement methods suggested above. 2. The methods explained are general and may not be effective in all cases. 3. The employer is responsible for selecting and carrying out an appropriate method.iate
Recent events (2)
- — I (S) $405.00
- — Z (S) $675.00
1910.107 B05 IV
- Issued
- Oct 10, 2000
- Abate by
- Nov 12, 2000
- Penalty
- Initial $675 · Current $405 Reduced
Recent events (2)
- — I (S) $405.00
- — Z (S) $675.00
1910.147 C05 I
- Issued
- Oct 10, 2000
- Abate by
- Nov 12, 2000
- Penalty
- Initial $675 · Current $405 Reduced
Recent events (2)
- — I (S) $405.00
- — Z (S) $675.00
1910.147 C07 I
- Issued
- Oct 10, 2000
- Abate by
- Nov 12, 2000
- Penalty
- Initial $675 · Current $405 Reduced
Recent events (2)
- — I (S) $405.00
- — Z (S) $675.00
1910.147 D04 I
- Issued
- Oct 10, 2000
- Abate by
- Nov 12, 2000
- Penalty
- Initial $675 · Current $405 Reduced
Recent events (2)
- — I (S) $405.00
- — Z (S) $675.00
1910.157 G01
- Issued
- Oct 10, 2000
- Abate by
- Nov 12, 2000
- Penalty
- Initial $675 · Current $405 Reduced
Recent events (2)
- — I (S) $405.00
- — Z (S) $675.00
More inspections at Schumacher Company INC.
View Schumacher Company INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 301407334.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.