OSHA Inspection: DELTEC HOMES, INC.

Issued

Sep 25, 1997

Abate by

Oct 8, 1997

Penalty

Initial $100 · Current $100

General-duty citation text

North Carolina General Statute 95-129 (1) of the Occupational Safety and
Health Act of North
Carolina:  The employer did not furnish to each of his employees
conditions of employment and
a place of employment which were free from recognized hazards that were
causing or likely to
cause death or serious physical harm to employees:
a)wall fabrication shop--
1.A Budget 1 ton overhead hoisting device was not provided with an initial
inspection prior to being placed in operation.
2.A Dayton 1/2 ton overhead hoisting device was not provided with and
initial inspection prior to being place in operation.
3.A CM 1 ton overhead hoisting device was not provided with an initial
inspection prior to being place in operation.
Reference:ANSI B30.16-1980; paragraph 16-2.1.1(a)  Initial Inspection.
Prior to initial use, all new, altered or modified hoists shall be
inspected by a designated person to ensure compliance with the
applicable provisions of this standard.
NOTE:Among other methods, one feasible and acceptable method to
correct this hazard is to have all overhead hoisting devices given
an initial inspection before continuing with there use.
b)1.A Budget 1 ton overhead hoisting device was not provided with an annual
load test.
2.A Dayton 1/2 ton overhead hoisting device was not provided with an
annual load test.
3.A CM 1 ton overhead hoisting device was not provided with an annual
load test.
Reference:ANSI B30.16-1980; paragraph 16-2.1.1(b)(2)  Periodic Inspection.
Visual inspection by appointed person who makes records of
apparent external conditions to provide the basis for a continuing
evaluation.
NOTE:Among other methods, one feasible and acceptable method to
correct this hazard is to have all overhead hoisting devices load
tested.
c)1.A test report for a Budget 1 ton overhead hoisting device was not
maintained.
2.A test report for a Dayton 1/2 ton overhead hoisting device was not
maintained.
3.A test report for a CM 1 ton overhead hoisting device was not maintained.
Reference:ANSI B30.16-1980;  paragraph 16-2.1.5(b)  Dated inspection
reports and records should be maintained at time and intervals as
specified in 16-2.1.1(b)(2).  Record should be stored where they
are available to appointed personnel.
NOTE:Among other methods, one feasible and acceptable method to
correct this hazard is to conduct load testing for all overhead
hoisting devices and make them readily available.

Issued

Sep 25, 1997

Abate by

Oct 8, 1997

Penalty

Initial $100 · Current $100

Issued

Sep 25, 1997

Abate by

Oct 8, 1997

Issued

Sep 25, 1997

Abate by

Oct 8, 1997

Issued

Sep 25, 1997

Abate by

Oct 8, 1997

Issued

Sep 25, 1997

Abate by

Oct 8, 1997

Issued

Sep 25, 1997

Abate by

Oct 8, 1997

Issued

Sep 25, 1997

Abate by

Oct 8, 1997

Issued

Sep 25, 1997

Abate by

Oct 8, 1997

Issued

Sep 25, 1997

Abate by

Oct 8, 1997

Issued

Sep 25, 1997

Abate by

Oct 8, 1997