RALEIGH, NC —
OSHA Inspection: GIBSON MASONRY, INC.
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of GIBSON MASONRY, INC. in AGRICULTURAL COMMUNICATIONS BUILDING AT NCSU, RALEIGH, NC 27606 (NAICS 000000). OSHA activity number 301960415.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GIBSON MASONRY, INC.
- Site address
- AGRICULTURAL COMMUNICATIONS BUILDING AT NCSU
- City
- RALEIGH
- State
- NC
- ZIP
- 27606
- Mailing
- P.O. BOX 430, FOUR OAKS, NC 27514
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 1741
- Employees
- 10
- Ownership type
- A
- Industry flags
- Construction safety.
Citations
8 citations on file for this inspection.
1926.451 C02 II
- Issued
- Nov 24, 1997
- Abate by
- Nov 28, 1997
- Penalty
- Initial $750 · Current $750
1926.451 G01 VII
- Issued
- Nov 24, 1997
- Abate by
- Nov 28, 1997
- Penalty
- Initial $750 · Current $750
1926.454 B
- Issued
- Nov 24, 1997
- Abate by
- Dec 12, 1997
- Penalty
- Initial $750 · Current $750
1910.1200 H
- Issued
- Nov 24, 1997
- Abate by
- Dec 12, 1997
- Penalty
- Initial $100 · Current $100
95012901
- Issued
- Nov 24, 1997
- Abate by
- Nov 28, 1997
- Penalty
- Initial $1,050 · Current $1,050
General-duty citation text
North Carolina General Statue 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees condition of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a)Agricultural Communications Building at NCSU project- mast-climbing work platform set at 20 ft. high presenting following conditions: *.- open gates serving as guardrails *.- lack of guardrail on S.E. end of bracket platform *.- and inadequate guardrail setting on N.E. end of bracket platform (guardrail was set at end of bracket platform but an unprotected gap of 2 ft. was left on side of platform.) Adequate abatement methods for these conditions include but are not limited to: adequate installation of guardrails on all open sides and ends of the working platforms or the use of a fall arrest systems. Adequate training of employees on the hazards associated with the use of mast-climbing work platforms and work performed on while on it and the control methods. Reference ANSI/SIA A92.9-1993. Part 7.10 reads:" The Mast Climbing Work Platform shall be used in accordance with this Standard and manufacturer's instructions. The user shall direct the operator to the following before each elevation of the platform: .....that guardrails and mast guards are installed and access gates or openings are closed per manufacturer's instructions..."! Xr Py Py &
95012901
- Issued
- Nov 24, 1997
- Abate by
- Dec 12, 1997
- Penalty
- Initial $1,050 · Current $1,050
General-duty citation text
North Carolina General Statue 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees condition of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: falls while using masts of mast-climbing work platform as means of access. a)Agricultural Communications Building at NCSU project- employees accessing mast-climbing work platform set at 20 ft using platform masts as means of access. The masts horizontal members were not provided with slip resistant material and measured 11 in. in length. In addition there were cross members between the horizontal members of the outriggers that reduced their vertical space. Adequate abatement methods for these conditions include but are not limited to: provision of hook on ladders or other means of access reccommended by manufacturer. Reference ANSI/SIA A92.9-1993. Part 4.11.5 reads:" ...Mast Climbing Work Platform shall include access means for personnel to use in reaching the platform when it is in the lowered position. Access steps or rungs shall have a slip-resistant surface..."!nt
1926.451 E01
- Issued
- Nov 24, 1997
- Abate by
- Nov 28, 1997
- Penalty
- Initial $375 · Current $375
1910.1200 E01
- Issued
- Nov 24, 1997
- Abate by
- Dec 12, 1997
More inspections at Gibson Masonry, INC.
View Gibson Masonry, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 301960415.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.