PRINCETON, NC —
OSHA Inspection: J. D. TODD, INC.
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of J. D. TODD, INC. in 101 DR. DONNIE H. JONES BLVD. E., PRINCETON, NC 27569 (NAICS 000000). OSHA activity number 301967709.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J. D. TODD, INC.
- Site address
- 101 DR. DONNIE H. JONES BLVD. E.
- City
- PRINCETON
- State
- NC
- ZIP
- 27569
- Mailing
- PO BOX 1053, GOLDSBORO, NC 27533
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 1741
- Employees
- 5
- Ownership type
- A
- Industry flags
- Construction safety.
Citations
14 citations on file for this inspection.
95012901
- Issued
- Mar 31, 1998
- Abate by
- Apr 3, 1998
- Penalty
- Initial $700 · Current $700
General-duty citation text
NCGS 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to crushing hazards. Employee operating the rough terrain fork lift, with over head guard, was not wearing the installed seat belts: a)North End of Building "E" - employee operating A716 American Eagle Forklift equipped with overhead guard was not wearing the installed seatbelt when driving in accordance with ANSI B56.6-1992 para 6.2.1 (a). (Ref. ASME/ANSI B56.6-1992) One feasible and acceptable abatement method, among others, to correct this hazard is to utilize the installed seat belts any time the equipment is in operation.
1926.25 A
- Issued
- Mar 31, 1998
- Abate by
- Apr 18, 1998
- Penalty
- Initial $2,100 · Current $2,100
1926.451 B01
- Issued
- Mar 31, 1998
- Abate by
- Apr 18, 1998
1926.451 B05 I
- Issued
- Mar 31, 1998
- Abate by
- Apr 18, 1998
1926.451 B05 II
- Issued
- Mar 31, 1998
- Abate by
- Apr 18, 1998
1926.451 E01
- Issued
- Mar 31, 1998
- Abate by
- Apr 18, 1998
1926.451 E01
- Issued
- Mar 31, 1998
- Abate by
- Apr 18, 1998
1926.451 F03
- Issued
- Mar 31, 1998
- Abate by
- Apr 18, 1998
1926.451 F07
- Issued
- Mar 31, 1998
- Abate by
- Apr 18, 1998
1926.451 G04 I
- Issued
- Mar 31, 1998
- Abate by
- Apr 18, 1998
1926.451 H02 II
- Issued
- Mar 31, 1998
- Abate by
- Apr 18, 1998
1926.452 C02
- Issued
- Mar 31, 1998
- Abate by
- Apr 18, 1998
1926.454 A
- Issued
- Mar 31, 1998
- Abate by
- Apr 18, 1998
1926.501 B10
- Issued
- Mar 31, 1998
- Abate by
- Apr 18, 1998
More inspections at J. D. Todd, INC.
View J. D. Todd, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 301967709.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.