ELLENVILLE, NY —
OSHA Inspection: IMPERIAL SCHRADE CORP.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of IMPERIAL SCHRADE CORP. in 7 SCHRADE COURT, ELLENVILLE, NY 12428 (NAICS 000000). OSHA activity number 302004528.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- IMPERIAL SCHRADE CORP.
- Site address
- 7 SCHRADE COURT
- City
- ELLENVILLE
- State
- NY
- ZIP
- 12428
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3421
- Employees
- 640
- Ownership type
- A
Citations
26 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
- Penalty
- Initial $1,625 · Current $975 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employmnent and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being pulled into and crushed by the rotating parts of a pipe threader machine: (a)6/12/98, Pipe Shop - Rigid pipe threader, #345777, was operated by a toggle switch that would not automatically shut the machine off if its operator was inadvertently caught up in its rotating parts. Abatement Notes: Among other methods, one feasible method to reduce this hazard is to establish and enforce adequate safe operating procedures as stipulated in the American National Standard for Portable Pipe Threading Machines (ANSI B208.1-1982). Elements essential to an acceptable safe operating procedure include at a minimum: 1.Installation of a monetary contact device (deadman foot switch) to control power input to the machine. This device would automatically stop the machine and the rotating pipe if the operator's foot was removed from the foot switch for any reason. 2.Provide training and education to the machine operators concerning all the appropriate procedures for the safe operation and use of this type of machinery. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $975.00
- — Z (S) $1625.00
1910.132 A
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
- Penalty
- Initial $1,625 · Current $975 Reduced
Recent events (2)
- — I (S) $975.00
- — Z (S) $1625.00
1910.132 D01
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
1910.133 A01
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
1910.133 A02
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
1910.136 A
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
1910.147 C04 I
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
- Penalty
- Initial $1,625 · Current $975 Reduced
Recent events (2)
- — I (S) $975.00
- — Z (S) $1625.00
1910.147 C07 I
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
1910.212 A01
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
- Penalty
- Initial $1,625 · Current $975 Reduced
Recent events (2)
- — I (S) $975.00
- — Z (S) $1625.00
1910.212 A03 II
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
- Penalty
- Initial $1,625 · Current $975 Reduced
Recent events (2)
- — I (S) $975.00
- — Z (S) $1625.00
1910.212 A04
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
- Penalty
- Initial $1,300 · Current $780 Reduced
Recent events (2)
- — I (S) $780.00
- — Z (S) $1300.00
1910.213 B03
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
- Penalty
- Initial $1,625 · Current $975 Reduced
Recent events (2)
- — I (S) $975.00
- — Z (S) $1625.00
1910.215 A02
- Issued
- Aug 4, 1998
- Abate by
- Sep 30, 1998
- Penalty
- Initial $975 · Current $585 Reduced
Recent events (3)
- — P (S) $585.00
- — I (S) $585.00
- — Z (S) $975.00
1910.215 B09
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
- Penalty
- Initial $1,300 · Current $780 Reduced
Recent events (2)
- — I (S) $780.00
- — Z (S) $1300.00
1910.217 C02 IA
- Issued
- Aug 4, 1998
- Abate by
- Oct 15, 1998
- Penalty
- Initial $1,625 · Current $975 Reduced
Recent events (3)
- — P (S) $975.00
- — I (S) $975.00
- — Z (S) $1625.00
1910.217 D09 IV
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
- Penalty
- Initial $1,625 · Current $975 Reduced
Recent events (2)
- — I (S) $975.00
- — Z (S) $1625.00
1910.219 D01
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
- Penalty
- Initial $1,875 · Current $1,125 Reduced
Recent events (2)
- — I (S) $1125.00
- — Z (S) $1875.00
1910.219 E03 I
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
1910.253 B04 III
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
- Penalty
- Initial $975 · Current $585 Reduced
Recent events (2)
- — I (S) $585.00
- — Z (S) $975.00
1910.305 B01
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
- Penalty
- Initial $1,625 · Current $975 Reduced
Recent events (2)
- — I (S) $975.00
- — Z (S) $1625.00
1910.37 Q05
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
1910.303 F
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
1910.1030 C01 I
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
1910.1200 F05 I
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
1910.1200 F05 II
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
1910.1200 H
- Issued
- Aug 4, 1998
- Abate by
- Sep 6, 1998
More inspections in this industry (NAICS 000000)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302004528.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.