DENVER, CO —
OSHA Inspection: UNIVERSAL STAINLESS, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of UNIVERSAL STAINLESS, INC. in 5045 OAKLAND STREET, DENVER, CO 80239 (NAICS 000000). OSHA activity number 302070149.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- UNIVERSAL STAINLESS, INC.
- Site address
- 5045 OAKLAND STREET
- City
- DENVER
- State
- CO
- ZIP
- 80239
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3499
- Employees
- 63
- Ownership type
- A
Citations
14 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 1, 1998
- Abate by
- Jan 17, 1999
- Penalty
- Initial $2,500 · Current $1,250 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of having a part of their body caught in the hydraulic press brake: a) Universal Stainless, Inc., Denver, CO: On or about September 10, the employer had not implemented a program of safeguarding by maintaining a "safe distance" to prevent employees from having any part of their body caught in the point of operation of the hydraulic press brakes. An effective "Safe Distance" Safeguarding Program includes the following: 1. Exposure prevention procedures; 2. Training; and 3. Enforcement of the procedures. Abatement Note: Abatement certification and documentation are required for this item (See enclosed "Sample Abatement-Certification Letter").
Recent events (2)
- — I (S) $1250.00
- — Z (S) $2500.00
1910.23 C01
- Issued
- Dec 1, 1998
- Abate by
- Dec 14, 1998
- Penalty
- Initial $2,500 · Current $1,250 Reduced
Recent events (2)
- — I (S) $1250.00
- — Z (S) $2500.00
1910.38 A05 II
- Issued
- Dec 1, 1998
- Abate by
- Jan 3, 1999
- Penalty
- Initial $2,500 · Current $1,250 Reduced
Recent events (2)
- — I (S) $1250.00
- — Z (S) $2500.00
1910.95 I02 I
- Issued
- Dec 1, 1998
- Abate by
- Dec 9, 1998
- Penalty
- Initial $2,500 · Current $1,250 Reduced
Recent events (2)
- — I (S) $1250.00
- — Z (S) $2500.00
1910.95 I03
- Issued
- Dec 1, 1998
- Abate by
- Dec 19, 1998
Recent events (2)
- — I (S)
- — Z (S)
1910.106 E06 I
- Issued
- Dec 1, 1998
- Abate by
- Dec 5, 1998
- Penalty
- Initial $2,500 · Current $1,250 Reduced
Recent events (2)
- — I (S) $1250.00
- — Z (S) $2500.00
1910.132 A
- Issued
- Dec 1, 1998
- Abate by
- Dec 19, 1998
- Penalty
- Initial $3,500 · Current $1,750 Reduced
Recent events (2)
- — I (S) $1750.00
- — Z (S) $3500.00
1910.157 G02
- Issued
- Dec 1, 1998
- Abate by
- Jan 3, 1999
- Penalty
- Initial $2,500 · Current $1,250 Reduced
Recent events (2)
- — I (S) $1250.00
- — Z (S) $2500.00
1910.22 D01
- Issued
- Dec 1, 1998
- Abate by
- Jan 3, 1999
Recent events (2)
- — I (O)
- — Z (O)
1910.134 C01
- Issued
- Dec 1, 1998
- Abate by
- Jan 3, 1999
Recent events (2)
- — I (O)
- — Z (O)
1910.141 A03 I
- Issued
- Dec 1, 1998
- Abate by
- Dec 9, 1998
Recent events (2)
- — I (O)
- — Z (O)
1910.1200 H
- Issued
- Dec 1, 1998
- Abate by
- Jan 29, 1999
Recent events (2)
- — I (O)
- — Z (O)
1910.1200 F05 I
- Issued
- Dec 1, 1998
- Abate by
- Jan 3, 1999
Recent events (2)
- — I (O)
- — Z (O)
1910.1200 F05 II
- Issued
- Dec 1, 1998
- Abate by
- Jan 3, 1999
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Universal Stainless, INC.
View Universal Stainless, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302070149.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.