ABERDEEN, NC —
OSHA Inspection: INDUSTRIAL METAL PRODUCTS OF ABERDEEN, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of INDUSTRIAL METAL PRODUCTS OF ABERDEEN, INC. in 461 CAROLINA RD., ABERDEEN, NC 28315 (NAICS 000000). OSHA activity number 302119854.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INDUSTRIAL METAL PRODUCTS OF ABERDEEN, INC.
- Site address
- 461 CAROLINA RD.
- City
- ABERDEEN
- State
- NC
- ZIP
- 28315
- Mailing
- 461 CAROLINA RD., ABERDEEN, NC 28315
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3429
- Employees
- 10
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
17 citations on file for this inspection.
95012901
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
- Penalty
- Initial $250 · Current $250
General-duty citation text
North Carolina General Statue 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to a crushing hazard: a)next to machine shop -- employees were using a Jet 1 ton electric overhead chain hoist mounted on steel I-Beams welded onto to pre-fabricated building supports. The hoist was used to lift 500 lb. steel loads. Dated hoist inspection reports and records were not maintained.(Ref. ANSI B30.16-1981 Sec. 16-2.1.5(a)). One feasible method of abatement, among others, is to perform and document annual and frequent inspections on the crane.tions
1910.179 J02
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
1910.108 B01
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
- Penalty
- Initial $250 · Current $250
1910.108 E02
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
1910.108 F04
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
1910.108 F03
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
1910.252 A02 VIC
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
1910.212 A01
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
- Penalty
- Initial $250 · Current $250
1910.303 B01
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
- Penalty
- Initial $175 · Current $175
1910.305 G01 III
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
1910.254 D09 III
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
1910.305 B01
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
- Penalty
- Initial $175 · Current $175
1910.22 A02
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
1910.22 D01
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
1910.212 A05
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
1910.215 A04
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
1910.1200 E01
- Issued
- May 15, 1998
- Abate by
- Jun 2, 1998
More inspections at Industrial Metal Products of Aberdeen, INC.
View Industrial Metal Products of Aberdeen, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302119854.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.