SELMA, NC —
OSHA Inspection: THYSSEN PRECISION FORGE, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of THYSSEN PRECISION FORGE, INC. in 500 OAK TREE DRIVE, SELMA, NC 27576 (NAICS 000000). OSHA activity number 302121736.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THYSSEN PRECISION FORGE, INC.
- Site address
- 500 OAK TREE DRIVE
- City
- SELMA
- State
- NC
- ZIP
- 27576
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3462
- Employees
- 150
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
48 citations on file for this inspection.
7F0102
- Issued
- Jul 14, 1998
- Abate by
- Nov 30, 1998
- Penalty
- Initial $250 · Current $250
Recent events (2)
- — P (S) $250.00
- — Z (S) $250.00
95012901
- Issued
- Jul 14, 1998
- Abate by
- Oct 30, 1998
- Penalty
- Initial $125 · Current $125
General-duty citation text
North Carolina General Statue 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to carbon monoxide: a)site, heat treat area - incomplete ventilation system over heat treat ovens. One possible method of abatement is to bring the ventilation system up to the standards of NFPA 54 National Fuel Code part 7.
Recent events (2)
- — P (S) $125.00
- — Z (S) $125.00
1910.22 C
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
- Penalty
- Initial $125 · Current $125
1910.27 F
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.178 G02
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
- Penalty
- Initial $125 · Current $125
1910.111 B10 III
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.151 C
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.111 B10 II
- Issued
- Jul 14, 1998
- Abate by
- Oct 30, 1998
Recent events (2)
- — P (S)
- — Z (S)
1910.134 E01
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.134 H01 III
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.134 H03 IB
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.134 H03 IVA
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.134 H04 I
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.147 C04 II
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
- Penalty
- Initial $350 · Current $350
1910.147 C05 IID
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.212 A03 II
- Issued
- Jul 14, 1998
- Abate by
- Sep 30, 1998
- Penalty
- Initial $250 · Current $250
Recent events (2)
- — P (S) $250.00
- — Z (S) $250.00
1910.212 A05
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.212 B
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.219 E03 I
- Issued
- Jul 14, 1998
- Abate by
- Oct 30, 1998
Recent events (2)
- — P (S)
- — Z (S)
1910.219 C02 I
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.215 A04
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
- Penalty
- Initial $250 · Current $250
1910.215 B09
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.243 C01
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.303 H02
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
- Penalty
- Initial $350 · Current $350
1910.304 F04
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.305 B02
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.305 D
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.305 G01 I
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.305 G02 II
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
7F0102
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.23 A08 I
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.144 A03
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.145 C02
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.145 F04 II
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.146 C01
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.157 C01
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.157 E02
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.178 N04
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.184 E01
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.184 E03 II
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.184 E04
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.212 A01
- Issued
- Jul 14, 1998
- Abate by
- Sep 30, 1998
Recent events (2)
- — P (O)
- — Z (O)
1910.244 A02 IVA
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.303 E
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.303 F
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.303 G01 III
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.305 G02 III
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
1910.335 B01
- Issued
- Jul 14, 1998
- Abate by
- Aug 1, 1998
More inspections at Thyssen Precision Forge, INC.
View Thyssen Precision Forge, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302121736.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.