MORVEN, NC —
OSHA Inspection: HOME INNOVATIONS DBA GLENN MANUFACTURING COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HOME INNOVATIONS DBA GLENN MANUFACTURING COMPANY in P.O. BOX 83, MORVEN, NC 28119 (NAICS 000000). OSHA activity number 302122239.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HOME INNOVATIONS DBA GLENN MANUFACTURING COMPANY
- Site address
- P.O. BOX 83
- City
- MORVEN
- State
- NC
- ZIP
- 28119
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2392
- Employees
- 400
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
14 citations on file for this inspection.
95012901
- Issued
- Jun 11, 1998
- Abate by
- Jun 29, 1998
- Penalty
- Initial $1,000 · Current $1,000
General-duty citation text
North Carolina General Statue 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to a crushing hazard: a)next to machine shop -- employees were using a Jet 1 ton electric overhead chain hoist mounted on steel lattice supports welded onto to pre-fabricated building supports. The hoist was used to lift 500 lb. bolts of cloth. Dated hoist inspection reports and records were not maintained.(Ref. ANSI B30.16-1981 Sec. 16-2.1.5(a)). One feasible method of abatement, among others, is to perform and document annual and frequent inspections on the crane.tions
1910.213 C01
- Issued
- Jun 11, 1998
- Abate by
- Jun 29, 1998
- Penalty
- Initial $1,400 · Current $1,400
1910.213 C02
- Issued
- Jun 11, 1998
- Abate by
- Jun 29, 1998
1910.213 C03
- Issued
- Jun 11, 1998
- Abate by
- Jun 29, 1998
1910.212 B
- Issued
- Jun 11, 1998
- Abate by
- Jun 29, 1998
1910.219 D01
- Issued
- Jun 11, 1998
- Abate by
- Jun 29, 1998
- Penalty
- Initial $600 · Current $600
1910.219 E01 I
- Issued
- Jun 11, 1998
- Abate by
- Jun 29, 1998
1910.304 F04
- Issued
- Jun 11, 1998
- Abate by
- Jun 29, 1998
- Penalty
- Initial $500 · Current $500
1910.305 B01
- Issued
- Jun 11, 1998
- Abate by
- Jun 29, 1998
- Penalty
- Initial $700 · Current $700
1910.305 G01 III
- Issued
- Jun 11, 1998
- Abate by
- Jun 29, 1998
- Penalty
- Initial $1,000 · Current $1,000
1910.305 G02 III
- Issued
- Jun 11, 1998
- Abate by
- Jun 29, 1998
1910.334 A05 II
- Issued
- Jun 11, 1998
- Abate by
- Jun 29, 1998
1910.305 G01 II
- Issued
- Jun 11, 1998
- Abate by
- Jun 29, 1998
- Penalty
- Initial $700 · Current $700
1910.212 A01
- Issued
- Jun 11, 1998
- Abate by
- Jun 29, 1998
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302122239.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.