FRANKLIN, NC —
OSHA Inspection: WHITLEY PRODUCTS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WHITLEY PRODUCTS, INC. in FIRST AND VAN RAALTE ST., FRANKLIN, NC 28734 (NAICS 000000). OSHA activity number 302138060.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WHITLEY PRODUCTS, INC.
- Site address
- FIRST AND VAN RAALTE ST.
- City
- FRANKLIN
- State
- NC
- ZIP
- 28734
- Mailing
- PO BOX 1118, FRANKLIN, NC 28734
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3714
- Employees
- 125
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
21 citations on file for this inspection.
95012901
- Issued
- May 11, 1998
- Abate by
- Jun 13, 1998
- Penalty
- Initial $313 · Current $157 Reduced
General-duty citation text
North Carolina General Statute 95-129 (1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: a)cutting department--a CM Valustar 1 ton overhead monorail hoist was not provided with frequent and periodic inspections Reference: ANSI B30.11-1980; Section 11-2.1 NOTE:Among other methods of abatement, one feasible and acceptable method is to provide frequent and periodic inspections on the hoist and associated monorail system.
Recent events (2)
- — I (S) $156.50
- — Z (S) $313.00
95012901
- Issued
- May 11, 1998
- Abate by
- Jun 13, 1998
- Penalty
- Initial $313 · Current $157 Reduced
General-duty citation text
North Carolina General Statute 95-129 (1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: a)cutting department--a CM Valustar 1 ton overhead monorail hoist was not provided with an initial load test prior to being placed into operation. Reference:ANSI B30.11-1980; Section 11-2.2 NOTE:Among other methods of abatement, one feasible and acceptable method is to have the overhead hoist and associated monorail system load tested.
Recent events (2)
- — I (S) $156.50
- — Z (S) $313.00
1910.184 E01
- Issued
- May 11, 1998
- Abate by
- Jun 13, 1998
- Penalty
- Initial $375 · Current $217 Reduced
Recent events (2)
- — I (S) $217.24
- — Z (S) $375.00
1910.184 E03 I
- Issued
- May 11, 1998
- Abate by
- Jun 13, 1998
1910.184 E03 II
- Issued
- May 11, 1998
- Abate by
- Jun 13, 1998
1910.184 E04
- Issued
- May 11, 1998
- Abate by
- Jun 13, 1998
1910.184 I01
- Issued
- May 11, 1998
- Abate by
- Jun 13, 1998
- Penalty
- Initial $313 · Current $157 Reduced
Recent events (2)
- — I (S) $156.50
- — Z (S) $313.00
1910.212 A03 II
- Issued
- May 11, 1998
- Abate by
- May 29, 1998
- Penalty
- Initial $313 · Current $157 Reduced
Recent events (2)
- — I (S) $156.50
- — Z (S) $313.00
1910.215 A04
- Issued
- May 11, 1998
- Abate by
- May 29, 1998
- Penalty
- Initial $313 · Current $157 Reduced
Recent events (2)
- — I (S) $156.50
- — Z (S) $313.00
1910.215 B09
- Issued
- May 11, 1998
- Abate by
- May 26, 1998
1910.23 A01
- Issued
- May 11, 1998
- Abate by
- May 26, 1998
1910.38 A01
- Issued
- May 11, 1998
- Abate by
- Jun 13, 1998
1910.38 B01
- Issued
- May 11, 1998
- Abate by
- Jun 13, 1998
1910.303 B02
- Issued
- May 11, 1998
- Abate by
- May 26, 1998
1910.303 F
- Issued
- May 11, 1998
- Abate by
- May 26, 1998
1910.304 E01 IV
- Issued
- May 11, 1998
- Abate by
- May 26, 1998
1910.305 B01
- Issued
- May 11, 1998
- Abate by
- May 26, 1998
1910.305 G01 III
- Issued
- May 11, 1998
- Abate by
- May 14, 1998
1910.305 G02 III
- Issued
- May 11, 1998
- Abate by
- May 26, 1998
1910.334 B03
- Issued
- May 11, 1998
- Abate by
- May 14, 1998
1910.1200 F05 I
- Issued
- May 11, 1998
- Abate by
- May 14, 1998
More inspections at Whitley Products, INC.
View Whitley Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302138060.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.