GREENVILLE, NC ·
OSHA Inspection: NORTH CAROLINA EQUIPMENT COMPANY
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of NORTH CAROLINA EQUIPMENT COMPANY in 916 MEMORIAL DRIVE, GREENVILLE, NC 27834 (NAICS 000000). OSHA activity number 302357322.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NORTH CAROLINA EQUIPMENT COMPANY
- Site address
- 916 MEMORIAL DRIVE
- City
- GREENVILLE
- State
- NC
- ZIP
- 27834
- Mailing
- P.O. BOX 1487, GREENVILLE, NC 27834
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 7699
- Employees
- 13
- Ownership type
- Private (A)
- Industry flags
- Manufacturing health.
Citations
28 citations on file for this inspection.
95012901
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
- Penalty
- Initial $500 · Current $500
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to suspended loads held by overhead hoists: Frequent visual examinations by the operator or other designated personnel, were not performed on a monthly basis for hoists used under normal services (reference ANSI B30.16-1981 (16-2.1.1)): Periodic visual inspections by appointed person, who makes records of apparent external conditions, was not performed annually for hoist used under normal service, to provide the basis for a continuing evaluation (reference ANSI B30.16-1981 (16-2.1.1)): a)engine rebuild room - an electric powered 2 ton Budgit overhead, underslung hoist mounted on steel I-beams used to lift engines was not inspected frequently or periodically. b)steam ginny room - an electric powered 1/2 ton Budgit overhead, underslung hoist mounted on steel I-beams used to move small engine parts was not inspected frequently or periodically. ABATEMENT NOTE: The frequent inspection should include the requirements of ANSI B30.16-2.1.2 which includes checking the operating mechanisms, checking the hooks and chains and latches for damage. It is recommended that frequent inspections be recorded. The periodic inspection should include the requirements of ANSI B30.16-2.1.3 which includes checking the motor or load brake for external evidence of excessive wear and checking the suspension bolts, shafts, gears and rollers for signs of cracks or corrosion. Periodic inspections need to be recorded.
1910.180 D03
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.180 D04
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.101 B
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
- Penalty
- Initial $500 · Current $500
1910.253 B02 IV
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.253 B04 III
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.151 C
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
- Penalty
- Initial $500 · Current $500
1910.1200 G01
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.212 A01
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
- Penalty
- Initial $300 · Current $300
1910.215 B09
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
- Penalty
- Initial $300 · Current $300
1910.215 B09
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.305 B02
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
- Penalty
- Initial $700 · Current $700
1910.304 F04
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.305 B01
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
7F0102
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
7F0102
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
7F0102
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.106 E09 III
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.145 F03
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.157 C01
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.157 C04
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.157 E02
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.157 G02
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.212 A05
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.304 A02
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.305 G01 III
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.305 G02 III
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
1910.334 A02 I
- Issued
- Feb 15, 1999
- Abate by
- Mar 5, 1999
More inspections at North Carolina Equipment Company
View North Carolina Equipment Company's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 302357322.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.