GREENWOOD, MS —
OSHA Inspection: 4-D CONSTRUCTION COMPANY, INC.
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of 4-D CONSTRUCTION COMPANY, INC. in COUNTY ROAD 189, GREENWOOD, MS 38930 (NAICS 000000). OSHA activity number 302398169.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- 4-D CONSTRUCTION COMPANY, INC.
- Site address
- COUNTY ROAD 189
- City
- GREENWOOD
- State
- MS
- ZIP
- 38930
- Mailing
- 101 GLADNEY STREET, LOUISVILLE, MS 39339
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 1623
- Employees
- 2
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.1200 F05 I
- Issued
- Feb 8, 2001
- Abate by
- Feb 13, 2001
- Penalty
- Initial $100 · Current $100
1910.1200 F05 II
- Issued
- Feb 8, 2001
- Abate by
- Feb 13, 2001
5(a)(1)
- Issued
- Feb 7, 2001
- Abate by
- Feb 27, 2001
- Penalty
- Initial $2,100 · Current $1,000 Reduced
General-duty citation text
Section 5(a)(1) of Public Law 91-596, the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to: Hazard of being caught in rotating bore pipe or rotating stem. (a)County Road 189 - On October 2, 2000 employees were allowed to wear loose clothing when working around JT606 Sure Bore Machine. Among other methods, one feasible and acceptable method to correct this hazard is: Prohibit employees from wearing loose clothing during the operation of the JT606 Sure Bore Machine.
Recent events (2)
- — I (S) $1000.00
- — Z (S) $2100.00
5(a)(1)
- Issued
- Feb 7, 2001
- Abate by
- Mar 27, 2001
- Penalty
- Initial $4,900 · Current $1,000 Reduced
General-duty citation text
Section 5(a)(1) of Public Law 91-596, the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to: Hazard of being struck by machinery or equipment from the unexpected energization or start up of machines or equipment. (a)County Road 189 - On October 2, 2000 the JT606 Sure Bore Machine was not locked out during the breaking of the stems to prevent the unexpected energization of the boring machine. One feasible and acceptable abatement method, among others, to correct this hazard would be to implement a lockout/tagout procedure as prescribed in Section 3.1.2 of ANSI Z244.1-1982, entitled American National Standard for Personnel Protection - Lockout/Tagout of Energy Sources - Minimum Safety Requirements.
Recent events (2)
- — I (S) $1000.00
- — Z (S) $4900.00
More inspections in this industry (NAICS 000000)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302398169.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.