ANOKA, MN —
OSHA Inspection: LIFE FITNESS / PARABODY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of LIFE FITNESS / PARABODY, INC. in 6043 HIGHWAY 10 NW, ANOKA, MN 55303 (NAICS 000000). OSHA activity number 302500848.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LIFE FITNESS / PARABODY, INC.
- Site address
- 6043 HIGHWAY 10 NW
- City
- ANOKA
- State
- MN
- ZIP
- 55303
- Mailing
- 14150 SUNFISH LAKE BLVD., RAMSEY, MN 55303
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3949
- Employees
- 70
- Ownership type
- A
Citations
6 citations on file for this inspection.
182065302
- Issued
- Oct 12, 1999
- Abate by
- Oct 16, 1999
- Penalty
- Initial $1,050 · Current $350 Reduced
General-duty citation text
Minn. Stat. 182.653 subd. 2: The employer did not furnish to each employee, conditions of employment and a place of employment free from recognized hazards which caused or were likely to cause death or serious injury to employees. Specifically, A close proximity operated, electromagnetic, below-the-hook lifting device was not operated, inspected, and maintained properly to ensure the safety of the operator or other employees at the parts washer in the Press Area. This included: a)Marking of rated load capacity with a reference to the instruction manual for information relating to decreases in rating due to the load surface condition, thickness, percentage of contact with the magnet, temperature, metallurgical composition, and deflection were not present or were illegible. b)Operators of these electromagnetic lifting devices had not been instructed in the safe use of these lifters and their limitations, including conditions, load characteristics and factors that affect the lifting capacity or the safety of employees. Operators were permitted to operate these lifters before receiving this instruction and demonstrating their ability to operate the lifter as instructed. Copies of the Operator's Manual and Safety Instructions were not readily available to the operators who were unfamiliar with the manual or the safety instructions provided. c)The electromagnetic lifting device had not received frequent inspections at least monthly, nor a complete periodic inspection at least annually with dated inspection reports and records. The lifting device at the parts washer had a severely deteriorated or damaged synthetic encapsulation on the electrical coil, and it did not have the labels necessary to inform the operator of the rated load capacity or safe operating considerations. Abatement Guidelines: Comply with American National Standards Institute Standard B30.20 for Below-the-Hook Lifting Devices, and the manufacturer's recommendations, including those contained in the Operator's Manual and Safety Instructions with Inspection and Maintenance Instructions publication for this lifting device, or equivalent.
Recent events (2)
- — F (O) $350.00
- — Z (S) $1050.00
1910.147 C04 I
- Issued
- Oct 12, 1999
- Abate by
- Oct 29, 1999
- Penalty
- Initial $1,400 · Current $700 Reduced
Recent events (2)
- — F (S) $700.00
- — Z (S) $1400.00
1910.217 C01 I
- Issued
- Oct 12, 1999
- Abate by
- Jan 28, 2000
- Penalty
- Initial $2,100 · Current $1,400 Reduced
Recent events (2)
- — F (S) $1400.00
- — Z (S) $2100.00
1910.217 E01 II
- Issued
- Oct 12, 1999
- Abate by
- Oct 22, 1999
- Penalty
- Initial $1,050 · Current $350 Reduced
Recent events (2)
- — F (O) $350.00
- — Z (S) $1050.00
1910.217 F02
- Issued
- Oct 12, 1999
- Abate by
- Oct 29, 1999
- Penalty
- Initial $2,100 · Current $1,400 Reduced
Recent events (2)
- — F (S) $1400.00
- — Z (S) $2100.00
1910.303 G02 I
- Issued
- Oct 12, 1999
- Abate by
- Oct 16, 1999
- Penalty
- Initial $2,100 · Current $700 Reduced
Recent events (2)
- — F (O) $700.00
- — Z (S) $2100.00
More inspections in this industry (NAICS 000000)
More inspections in MN
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302500848.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.