OSHA Inspection: D & D SHEET METAL, INC.

Issued

Aug 16, 2000

Abate by

Aug 21, 2000

Penalty

Initial $1,250 · Current $750 Reduced

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not furnish employment
and a place of employment which were free from recognized hazards that
were causing or likely to cause
death or serious physical harm to employees in that employees were exposed
to:
a) Superfresh, Main Floor - The employer did not furnish a place of
employment that was free from
recognized hazards.  The employer had employees performing sheet metal
work from scissor lifts and
had failed to protect its employees by covering thirty 2 foot by 2 foot
floor holes in the area.  The
condition contributed to accident onsite that injured two employees of a
separate contractor when the
employees drove the vehicle into the floor hole, tipping the scissor lift.
ABATEMENT NOTE:  One method of abatement would be to cover all floor holes
or to
maintain a safe working distance from obstacles, debris, drop-offs, holes,
depressions, ramps and
other hazards to ensure safe elevated travel as per ANSI A92.6-1990
Section
8.10.15.