FARMVILLE, NC —
OSHA Inspection: COLLINS & AIKMAN PRODUCTS CO.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of COLLINS & AIKMAN PRODUCTS CO. in HWY. 264 ALTERNATE, FARMVILLE, NC 27828 (NAICS 000000). OSHA activity number 302635594.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COLLINS & AIKMAN PRODUCTS CO.
- Site address
- HWY. 264 ALTERNATE
- City
- FARMVILLE
- State
- NC
- ZIP
- 27828
- Mailing
- POB 208, FARMVILLE, NC 27828
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2221
- Employees
- 16000
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
17 citations on file for this inspection.
95012901
- Issued
- Mar 19, 1999
- Abate by
- Apr 6, 1999
- Penalty
- Initial $825 · Current $660 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a struck-by hazard: The function labels were not legible on the pendant control station for electric powered hoist ref. ANSI B30.16-1981 Sec. 16- 2.3.3(c)(7)!: a)surface finishing department - 480 lb. capacity, 480 volt, DEMAG electric chain hoist, used to load 65 lb. spools of body cloth into storage racks. One feasible and acceptable abatement method, among others, to correct this hazard is to label the function controls on the pendant control station.
Recent events (2)
- — I (S) $660.00
- — Z (S) $825.00
1910.22 D01
- Issued
- Mar 19, 1999
- Abate by
- Apr 6, 1999
- Penalty
- Initial $1,925 · Current $1,540 Reduced
Recent events (2)
- — I (S) $1540.00
- — Z (S) $1925.00
1910.23 C01
- Issued
- Mar 19, 1999
- Abate by
- Apr 21, 1999
- Penalty
- Initial $1,925 · Current $1,540 Reduced
Recent events (2)
- — I (S) $1540.00
- — Z (S) $1925.00
1910.23 C03
- Issued
- Mar 19, 1999
- Abate by
- Apr 21, 1999
1910.151 C
- Issued
- Mar 19, 1999
- Abate by
- Apr 21, 1999
- Penalty
- Initial $1,375 · Current $1,100 Reduced
Recent events (2)
- — I (S) $1100.00
- — Z (S) $1375.00
1910.147 C04 II
- Issued
- Mar 19, 1999
- Abate by
- Apr 21, 1999
- Penalty
- Initial $1,925 · Current $1,540 Reduced
Recent events (2)
- — I (S) $1540.00
- — Z (S) $1925.00
1910.147 C06 I
- Issued
- Mar 19, 1999
- Abate by
- Apr 21, 1999
1910.215 B09
- Issued
- Mar 19, 1999
- Abate by
- Mar 24, 1999
- Penalty
- Initial $1,375 · Current $1,100 Reduced
Recent events (2)
- — I (S) $1100.00
- — Z (S) $1375.00
1910.253 E03 IIC3
- Issued
- Mar 19, 1999
- Abate by
- Apr 6, 1999
- Penalty
- Initial $1,925 · Current $1,540 Reduced
Recent events (2)
- — I (S) $1540.00
- — Z (S) $1925.00
1910.252 B02 III
- Issued
- Mar 19, 1999
- Abate by
- Apr 6, 1999
- Penalty
- Initial $825 · Current $660 Reduced
Recent events (2)
- — I (S) $660.00
- — Z (S) $825.00
1910.262 I01
- Issued
- Mar 19, 1999
- Abate by
- Apr 21, 1999
- Penalty
- Initial $5,600 · Current $1,540 Reduced
Recent events (2)
- — I (S) $1540.00
- — Z (S) $5600.00
7F0102
- Issued
- Mar 19, 1999
- Abate by
- Mar 24, 1999
1910.27 B01 I
- Issued
- Mar 19, 1999
- Abate by
- Apr 21, 1999
1910.157 E01
- Issued
- Mar 19, 1999
- Abate by
- Apr 6, 1999
1910.303 F
- Issued
- Mar 19, 1999
- Abate by
- Apr 6, 1999
1910.305 B01
- Issued
- Mar 19, 1999
- Abate by
- Apr 21, 1999
1910.305 G01 III
- Issued
- Mar 19, 1999
- Abate by
- Apr 6, 1999
More inspections at Collins & Aikman Products CO.
View Collins & Aikman Products CO.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302635594.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.